Engineering · Manufacturing · Project support
info@hnksglobal.comWhatsApp +86 18836207779 ↗

Blog

  • Manual or Automated STS Operation: Define the Terminal Interfaces

    Manual or Automated STS Operation: Define the Terminal Interfaces

    Technical guide

    Manual or Automated STS Operation: Define the Terminal Interfaces

    Automation changes operating roles, data flows and recovery arrangements. Compare manual and automated concepts using the same vessel service, transfer process and exception-handling requirements.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    ship to shore container crane manufacturer
    ship to shore container crane manufacturer
    Project planning notes

    Key points for this crane project.

    1. What is a standard STS bridge?
    2. What is an automated STS bridge?
    3. Ordinary STS VS Automated STS Core Parameters
    Read the technical guide

    What is a standard STS bridge?

    Ordinary standard STS crane is the most basic and widely used manual quay container crane, the core of which relies on the operator to complete the whole operation in the overhead cab, which is the main loading and unloading equipment of traditional container terminals.

    This kind of standard STS crane machine structure is mature, simple control logic, mainly relying on manual control to complete the lifting, trolley travel, trolley running, spreader alignment and other full set of operational actions, support for single-box, double-box conventional loading and unloading modes, to adapt to the vast majority of standard container operating conditions.

    The automation configuration of the equipment is extremely low, almost no intelligent sensing and automatic control module, the threshold of troubleshooting and daily maintenance is even lower. On-site operation and maintenance personnel do not need to master complex software and digital technology, but only need to be familiar with the mechanical structure and basic electrical system to complete the daily maintenance.

    Relying on high adaptability and low O&M threshold, ordinary STS shorebridge is widely used in small and medium-sized container terminals, feeder ports, ports in emerging markets, as well as terminals with irregular vessel call schedules and flexible operating conditions. For terminals with weak automation infrastructure and limited budget, it is a very cost-effective basic configuration.

    What is an automated STS bridge?

    Automated STS bridge is a high-end port equipment adapted to container terminal automation. On the basis of the traditional mechanical structure of the bridge, it is equipped with a full set of sensor monitoring, visual recognition, automatic control and remote operation and maintenance system, which greatly reduces the proportion of manual intervention.

    The professional automated STS crane is equipped with laser positioning equipment, container OCR recognition system, anti-sway control system and special port management software, which can realize the automation functions such as automatic trolley alignment, intelligent control of lifting path, precise positioning of spreader, and collision avoidance and warning of equipment.

    Different from the traditional manual operation mode, the remote-controlled quay crane can support centralized control in the remote control room, so that the operator does not need to station in the high-altitude cab, which greatly optimizes the operating environment. At the same time, it can be deeply linked with AGV, automated yard gantry crane and terminal TOS system, which is suitable for the whole process operation mode of smart port.

    At present, the STS bridge automation in the industry is divided into three mainstream levels, namely, intelligent auxiliary manual bridge, remote control semi-automatic bridge, and highly automated bridge adapted to the whole process of intelligent terminal, the terminal can be upgraded step by step according to its own throughput and development planning.

    Ordinary STS VS Automated STS Core Parameters Comparison Table

    Combined with the global container terminal operation experience, we organize the core differences between the two types of ship-to-shore cranes, which is convenient for overseas projects to quickly select the model for reference:

    Core difference 1: Terminal operating capacity performance

    The operational capacity of ordinary STS shoreline crane depends entirely on the operator's operational experience and status. The operating rhythm of senior operators is faster and more accurate, while novice operators are prone to delayed rhythm and alignment deviation.

    The capacity of this type of equipment is also affected by the ship loading program, yard congestion, weather changes and other factors, the operation data fluctuations. However, the advantage lies in the high degree of manual flexibility, encountering container misalignment, sundry obstruction and other unconventional working conditions, can be quickly adjusted manually to adapt to the complex emergency scene.

    The automated STS shorebridge completely avoids the unstable production capacity problem caused by the fluctuation of manual status. The equipment relies on the fixed program, laser positioning and sway control system to complete the cycle of operation, and the rhythm, path, and alignment accuracy of each round of loading and unloading process remain uniform.

    In high-frequency, high-volume container operation scenarios, STS crane automation can continuously output stable capacity, and the linkage with automated yard equipment and transportation equipment is much smoother. The only limitation is that under extreme special working conditions, manual intervention is still required for adjustment, and it is not possible to completely disengage from manual assistance.

    Core Difference 2: Manpower allocation and operation safety

    The traditional STS bridge requires operators to stay in the overhead cab for a long time. The high-altitude operating environment is always affected by wind and rain, vibration, temperature difference, and the operator is easily fatigued by long-time operation, which not only affects the operation efficiency, but also has certain safety risks.

    This mode of operation is highly dependent on mature licensed operators, and many emerging ports and remote terminals are often faced with a shortage of skilled drivers and high personnel mobility, indirectly restricting the normal operation of the terminal.

    The automated STS bridge revolutionizes the traditional manpower operation mode, transferring the operator from the overhead cab to the remote control room on the ground. The operating environment is more comfortable and safe, which reduces the risk of overhead operation and personnel fatigue from the root.

    Core Difference 3: Pre-CAPEX input cost

    Ordinary STS shorebridge has lower procurement and infrastructure investment, simple equipment structure, no need for supporting sensing system, remote control room, high-speed data network and exclusive TOS docking module, short installation and debugging cycle, suitable for terminal projects with limited budget and urgent need for commissioning and operation.

    For new feeder terminals with unstable throughput and short-term planning, the common STS bridge will not cause idle equipment costs, and the risk of capital investment is lower.

    The upfront investment of automated STS bridge is higher, in addition to the cost of the entire mechanical structure, but also includes OCR recognition equipment, laser positioning system, automation control software, network security systems and remote control platform and other ancillary costs.

    At the same time, the equipment needs to be put into production before the completion of the terminal infrastructure renovation, system debugging, hardware and software adaptation work, the overall landing cycle is longer. This kind of investment is more suitable for large-scale deep-water container terminals with long-term operation, high throughput, and intelligent upgrading planning.

    Core difference 4: Long-term OPEX and full-cycle costs

    The long-term operation cost of ordinary STS quay bridge mainly focuses on the salary of front-line operators, regular machinery maintenance, spreader loss and safety management. The equipment structure is simple, the parts are common, the maintenance threshold is low, and there is no need to hire a professional technical team with high salary.

    However, the instability of manual operation will occasionally lead to problems such as operation errors and slight collision of equipment, indirectly generating additional downtime loss and maintenance costs.

    The automated STS shorebridge significantly reduces the front-line labor costs, but adds the costs of system operation and maintenance, sensor replacement, software upgrades, network security maintenance and so on. The maintenance of the equipment digitalization module is more specialized and requires regular overhaul by a fixed technical team.

    From a full-cycle perspective, automation equipment in high throughput terminals can quickly recover the initial investment by relying on stable capacity and low fault loss. For small and medium throughput terminals, the comprehensive operation cost of ordinary STS bridge is more advantageous.

    Core difference 5: terminal infrastructure supporting requirements

    Ordinary STS bridge has lower requirements on terminal infrastructure, only need to meet the standard quay wall bearing, track laying, conventional power supply and basic operation and maintenance channels, which is suitable for most of the traditional container terminal renovation and new projects.

    On the basis of conventional infrastructure, automated STS bridge also needs stable high-speed data network, uninterrupted power supply system, independent remote control room, and at the same time, it has to match the docking standard of terminal TOS system, automated yard equipment, and shore-side identification system.

    If the terminal yard is still purely manual mode of operation, even if equipped with high-end automation STS bridge, but also cannot play the full performance of the equipment. Port automation is a whole set of system engineering, a single equipment upgrade cannot realize the overall capacity enhancement.

    Selection program for different scale terminals

    For small and medium-sized container terminals, ordinary STS bridge is preferred. These terminals have moderate throughput, irregular port call frequency and limited budget, so the flexibility and low operation and maintenance cost of common equipment can fully meet the daily operation requirements.

    Small and medium-sized terminals can install anti-sway system, remote diagnosis, energy consumption monitoring and other intelligent auxiliary modules as required, which can slightly improve the stability of operation without increasing the high cost.

    Large-scale deep-water container hub port and smart terminal projects are more suitable for automated STS shore bridge. These terminals have high throughput and intensive ship turnover, and need stable operation capacity and digital management system, and the automation equipment can perfectly match the cooperative operation mode of AGV and automated stacking equipment.

    Automation upgrade program for in-service STS bridge

    Many terminals do not need to directly eliminate the old bridge and replace the new automation equipment. As long as the main steel structure of the equipment is intact and the basic electrical system can be modified, the automation upgrade can be completed step by step.

    Common low-cost upgrade projects include the addition of anti-sway system, remote control module, container visual identification system, equipment condition monitoring system, etc., which can gradually realize semi-automated operation and reduce the dependence on manual labor.

    If the old equipment outreach, lifting height cannot be adapted to large ships, or the equipment structure is aging seriously and has no value for transformation, directly replacing the brand new automated STS bridge will be more in line with the long-term development plan of the terminal.

    Automated STS bridge selection risk and avoid pit points

    When purchasing automation equipment, many customers only focus on the configuration of the equipment itself, ignoring the overall process of the terminal to adapt, resulting in the equipment cannot run at full capacity after the commissioning, resulting in cost waste.

    Automation equipment not only relies on mechanical performance, but also relies on software system, network stability and TOS docking accuracy. Network failure, system compatibility problems, sensing equipment loss, will directly lead to equipment downtime.

    At the same time, the automated terminal needs to be supported by a professional technical operation and maintenance team. If the team's technical ability is insufficient, it cannot investigate software and hardware failures in a timely manner, which will greatly affect the terminal's operational efficiency.

    Terminal equipment selection decision matrix

    For terminals with moderate throughput, controllable labor cost, limited budget and manual operation in yard, standard ship-to-shore crane is preferred.

    For terminals with high throughput, intensive ship turnover, high labor cost, smart port construction, and yard automation upgrades, the automated container terminal crane is preferred.

    For terminals that want to upgrade steadily, avoid the risk of full automation, and have medium budget, semi-automated STS crane can be selected, and the step-by-step upgrading mode can be adopted to match the development rhythm of the terminal.

    Discuss the crane arrangement for your project.

    Automation changes operating roles, data flows and recovery arrangements. Compare manual and automated concepts using the same vessel service, transfer process and exception-handling requirements. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Ship-To-Shore Crane (STS)

    View product parameters
    Lifting capacity: 40-65 80-120 tBoom outreach: 40-72 mWorking class: A8

    Transfer containers between ship and quay with an STS crane selected for the berth and vessel envelope. Define the lifting-appliance arrangement, outreach, rail position and handling cycle.

    Container Overhead Crane

    View product parameters
    Lifting capacity: 30-65 tSpan: 18-35 mLifting height: 8 – 20 m

    Transfer containers within a defined overhead runway area using a double-girder bridge and matched spreader. Container size, working clearance and the handling sequence determine the arrangement.

    Updated 2026 · Henan Mine Crane

  • Smart Port Crane Projects: Data, Controls and Operational Readiness

    Smart Port Crane Projects: Data, Controls and Operational Readiness

    Technical guide

    Smart Port Crane Projects: Data, Controls and Operational Readiness

    A connected crane needs usable data and a clear place in the terminal's operating system. Define the control interfaces, operational responsibilities and recovery processes before selecting automation features.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    Smart Port Cranes
    Smart Port Cranes
    Project planning notes

    Key points for this crane project.

    1. What Are Smart Port Cranes and How Do They Work?
    2. Why Are Ports Moving Toward Smart Crane Automation?
    3. Key Technologies Behind Automated Container Terminal
    Read the technical guide

    What Are Smart Port Cranes and How Do They Work?

    Smart crane definition

    Intelligent port crane is a new generation of intelligent lifting equipment specially developed for automated container terminals. It is a high-end port equipment integrating mechanical engineering, automatic control, Internet of Things, artificial intelligence, big data analysis and other technologies. In short, intelligent port crane is an automatic lifting equipment with independent perception, independent decision-making, automatic execution, intelligent operation and maintenance, remote control capability. It can automatically complete the whole process operations such as loading and unloading, stacking, translation, alignment and transfer of containers according to the instructions of port dispatching system without manual on-site control. At the same time, it has additional functions such as real-time monitoring, fault warning, data uploading and intelligent optimization. It is a special core equipment suitable for modern intelligent port construction.

    System components

    The intelligent operation of Henan Mine Crane intelligent port cranes relies on a complete and coordinated intelligent system architecture. The core consists of five core components. Each module has a clear division of labor and linkage to ensure efficient and stable operation of the equipment.

    • IoT monitoring: Internet of Things monitoring system is the core sensing module of equipment, equipped with multiple types of high-precision sensors, continuously collecting core data such as equipment operation and dock environment 24 hours a day, transmitting to the background in real time through 5G network, which can timely identify equipment abnormalities and potential safety hazards, give early warning in advance, and ensure stable and safe operation of equipment.
    • AI operation platforms: AI intelligent operation platforms have independent learning and dynamic optimization capabilities, rely on massive operation data to adapt to real-time terminal conditions, ship berthing and yard status, and independently optimize operation processes. It can quickly respond to various unexpected scenarios, adjust the operation scheme independently, effectively avoid risks and improve the overall operation efficiency.
    • Remote control technology: Remote control technology relies on low latency 5G and HD transmission technology to support remote monitoring and control equipment in the central control room. The equipment in conventional scenarios is fully automatic, and manual remote intervention can be carried out under special conditions, so as to get rid of the limitation of on-site operation, avoid high-risk risks, realize one-person multi-machine control, and effectively save labor costs.

    Why Are Ports Moving Toward Smart Crane Automation?

    Higher efficiency

    Henan Mine Crane intelligent crane automation operation completely broke the efficiency bottleneck of traditional manual operation. The traditional manual crane is limited by the physical strength, energy and operation proficiency of personnel, the effective operation time in a single day is limited, and the operation rhythm is unstable, the error rate is high, and it is easy to cause repeated handling, stacking and rework.

    Cost optimization

    In the long-term operation dimension, intelligent crane automation can help ports achieve all-round cost optimization. First of all, labor costs are greatly reduced, without a large number of on-site lifting operators and on-site management personnel, only a small number of background operation and maintenance personnel are required to complete the control of multiple equipment, and labor salaries, training and management expenses are greatly reduced. Secondly, reduce equipment loss and material loss, intelligent system accurately control operation action, avoid equipment wear, container damage, wire rope loss and other problems caused by brutal operation, and reduce equipment maintenance cost and material replacement cost. Finally, efficient turnover efficiency reduces ship demurrage fees, yard storage fees and logistics detention costs, greatly improving the overall profitability of the port.

    24/7 operation

    Traditional port operation is affected by factors such as personnel rotation, night operation restriction, severe weather shutdown, etc., so it is impossible to realize all-weather continuous operation, a large amount of operation time is wasted, and it is difficult to meet the demand of global uninterrupted logistics transportation. The intelligent port crane is not limited by personnel, rest and fatigue factors. Under the premise of normal operation and maintenance of the equipment, it can realize uninterrupted and uninterrupted continuous operation for 24 hours, and only stop briefly during regular maintenance period. Whether it is daytime, night, holidays or regular weather, the equipment can operate stably, maximize the use of terminal site and equipment resources, and greatly improve the saturation degree of port operations and annual throughput.

    Key Technologies Behind Automated Container Terminal Cranes

    AI technology

    Artificial intelligence technology is the core support for intelligent port cranes to realize high-level automation and intelligence, running through the whole process of equipment operation, scheduling and operation and maintenance. AI vision recognition technology can accurately identify container number, size, posture and position, and adapt to container operation of different specifications. AI intelligent scheduling algorithm can dynamically allocate equipment tasks according to the real-time operation pressure of the terminal, optimize the operation sequence, and avoid idle equipment and operation congestion. AI autonomous learning function can continuously accumulate operation data, continuously optimize operation path and operation parameters, continuously improve equipment operation accuracy and efficiency, and adapt to complex and changeable dock operation scenarios.

    IoT sensors

    Internet of Things sensor is the core carrier of equipment data acquisition, and it is also the basis for intelligent crane to realize accurate sensing and intelligent early warning. The equipment is equipped with dozens of intelligent sensing devices such as high-precision positioning sensors, weight sensors, vibration sensors, temperature sensors, wind speed sensors, vision sensors, etc. to collect equipment operating parameters, operation scene data and environmental data in an all-round way. All data are synchronized to the background system in real time, realizing equipment status visualization, operation process traceability and hidden danger problem early warning, providing accurate data support for equipment automation operation, intelligent operation and maintenance and troubleshooting.

    Digital twins

    Digital twin technology realizes intelligent management and control of equipment life cycle by constructing 1:1 virtual simulation model of intelligent crane and dock operation scene. The background system can synchronize the operation status, operation progress and position information of physical equipment in real time based on the digital twin model, and the management personnel can visually monitor the whole process of equipment operation through the virtual model. At the same time, it can simulate the operation effect under different operation scenarios and different equipment working conditions in advance, predict the operation risk in advance and optimize the operation scheme. It can also complete equipment failure simulation and maintenance plan formulation through simulation test, greatly reduce field commissioning and operation and maintenance costs, and improve the refined level of equipment management and control.

    Anti-sway systems

    In the process of container lifting, due to the influence of equipment travel, ship shaking and wind force, it is easy to cause sling swing problems, resulting in inaccurate alignment, operation jam and even potential safety hazards. The intelligent crane is equipped with high-precision intelligent sway control system, which can monitor the swing amplitude and direction of the lifting appliance in real time, accurately compensate and adjust the movement of the equipment through the algorithm, quickly suppress the swing of the lifting appliance, and control the swing amplitude in a very small range. The technology ensures the operation accuracy and stability under the high-speed operation state, makes the container alignment, dropping and stacking more accurate and efficient, effectively improves the operation efficiency, and eliminates the safety accidents and operation rework problems caused by the swing of the spreader.

    Types of Smart Cranes Used in Automated Terminals

    Automated RMG cranes

    Henan Mine Crane automatic rail-mounted gantry crane (RMG) is the core intelligent operation equipment of container yard, which is mainly used for stacking, sorting and transshipment of container yard. The equipment runs along fixed track, with high positioning accuracy, good operation stability, fixed operation range and adaptability to standardized container yard layout. Automatic RMG crane can realize unmanned automatic stacking, container retrieval and yard arrangement, with high stacking layers, high site utilization rate and stable operation efficiency. It is widely used in large automatic container yards, inland dry ports and bonded port areas. It is the main equipment for intelligent upgrading of storage yards.

    Automated RTG cranes

    Henan Mine Crane automatic Tire Gantry Crane (RTG) has the advantages of flexible movement and no fixed track, which is suitable for flexible terminal operation scenarios. Compared with RMG crane, automatic RTG crane adopts tire travel structure, which can switch operation area freely, without modifying dock ground track, adapting to intelligent transformation of old dock and flexible operation requirements in multiple areas. The equipment is equipped with intelligent positioning, automatic correction and unmanned operation system, which can independently complete container stacking, transfer and dumping operations in the storage yard, giving consideration to flexibility and intelligence, and adapting to the automatic upgrading requirements of small and medium-sized terminals and multi-function terminals.

    STS container cranes

    Quayside Container Crane (STS) is the core equipment of terminal front, mainly responsible for container handling between ships and terminals, and is the core guarantee of port throughput capacity. The intelligent automatic STS quayside crane is equipped with a complete set of intelligent control system, AI vision recognition, anti-sway system and remote control module, which can automatically complete the alignment, lifting, unloading and loading operations of ship containers and meet the operation requirements of super-large container ships. The equipment has high operation precision, strong bearing capacity and wide adaptability. It is the core main equipment for the automatic upgrading of large-scale hub ports, which directly determines the turnover efficiency of port ships.

    Yard cranes

    Intelligent crane is a general intelligent equipment suitable for container yard transfer, temporary storage and rapid sorting, covering all kinds of small automatic gantry cranes, intelligent stacking cranes and other models. This kind of equipment has compact structure, flexible operation and fast response speed. It is mainly used for auxiliary operations such as scattered container sorting, short-distance transfer and card docking loading and unloading in storage yard. It can cooperate with large-scale intelligent quayside crane, RMG and RTG crane to supplement the short board of full-process automatic operation of wharf, so as to realize unmanned closed-loop operation in the whole link of wharf loading and unloading, transfer and storage.

    Benefits of Smart Port Cranes for Modern Terminals

    Faster handling

    Relying on automation and intelligent operation mode, intelligent port crane completely solves the problems of low efficiency, slow rhythm and excessive jamming of traditional operation. The whole process of automatic continuous operation of the equipment, accurate and smooth movement, no manual operation pause, error rework, container single loading and unloading turnover time greatly shortened. At the same time, AI intelligent dispatching can optimize the operation sequence of equipment, avoid idle equipment and operation congestion, realize coordinated and efficient operation of multiple equipment, greatly improve the container handling capacity per unit time of the terminal, accelerate the turnover speed of ships and trucks, and comprehensively improve the overall operation efficiency and throughput capacity of the port.

    Lower costs

    Henan Mine Crane intelligent cranes can help ports achieve multi-dimensional cost reduction in manpower, operation and maintenance, energy consumption and management. At the manpower level, the on-site operation personnel are greatly reduced, and only a small number of background operation and maintenance personnel are required, and the long-term labor cost is significantly reduced. At the operation and maintenance level, intelligent monitoring can predict equipment failures in advance, reduce maintenance costs for sudden failures, accurately operate to reduce equipment wear and prolong equipment service life. At the energy consumption level, the intelligent system optimizes the operation rhythm, accurately controls the power output, and reduces the ineffective energy consumption. At the management level, standardized and automated operations reduce hidden costs such as material loss, operation rework and logistics detention, and comprehensively improve the economic benefits of port operations.

    Space optimization

    Traditional manual crane operation accuracy is limited, container stacking spacing is large, the number of layers is limited, and the utilization rate of storage space is low. With millimeter operation accuracy, intelligent port cranes can realize tight stacking and regular arrangement of containers, reasonable compression of stacking spacing, improvement of stacking layers of storage yard, and maximum excavation of space value of terminal site. On the premise of not expanding the terminal site, the storage capacity of the yard will be greatly improved, the spatial layout of the terminal will be optimized, the contradiction between the throughput growth of modern ports and the limited site resources will be solved, and the intensive and efficient operation of ports will be realized.

    Henan Mine Crane

    Relying on core technologies such as automation, Internet of Things and digital twins, intelligent port cranes have completely changed the extensive operation mode of traditional container terminals. It solves the industry pain points such as low manual operation efficiency, large error and poor safety, and realizes the standardized operation of the whole process of loading and unloading, stockpiling and transshipment at the wharf. With the continuous upgrading of technology, the adaptability and stability of intelligent lifting equipment continue to improve, continuously promoting the steady transformation of global ports towards digitalization and intelligence.

    At the moment when the competition in the port industry is white-hot, intelligent lifting equipment has become the core weapon for improving the quality and efficiency of the terminal and seizing the market. The high-quality intelligent port crane solutions manufactured by Henan Mine Crane can effectively reduce labor and operation costs, improve site utilization and eliminate safety accidents. If you want to upgrade the automatic terminal and create the core competitive advantage, the adaptive intelligent lifting equipment is the best choice to help the port realize long-term stable, green and efficient operation.

    Discuss the crane arrangement for your project.

    A connected crane needs usable data and a clear place in the terminal's operating system. Define the control interfaces, operational responsibilities and recovery processes before selecting automation features. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Container Overhead Crane

    View product parameters
    Lifting capacity: 30-65 tSpan: 18-35 mLifting height: 8 – 20 m

    Transfer containers within a defined overhead runway area using a double-girder bridge and matched spreader. Container size, working clearance and the handling sequence determine the arrangement.

    Container Straddle Carrier

    View product parameters
    Lifting capacity: 30 – 50 tStacking arrangement: 1 over 3 – 1 over 6Working class: A7 – A8

    Move containers between handling positions with a straddle carrier matched to the travel route and stacking layout. Define container load, ground conditions, clearance and the preferred drive system.

    Updated 2026 · Henan Mine Crane

  • Single- vs Double-Girder Overhead Cranes: Compare the Complete Arrangement

    Single- vs Double-Girder Overhead Cranes: Compare the Complete Arrangement

    Technical guide

    Single- vs Double-Girder Overhead Cranes: Compare the Complete Arrangement

    Girder count alone does not settle the selection. Compare the lifting mechanism, hook envelope, runway loading and required working duty using configuration-specific drawings and technical data.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    Single Girder Overhead Crane
    Single Girder Overhead Crane
    Project planning notes

    Key points for this crane project.

    1. What is a single girder overhead crane?
    2. What is a double girder overhead crane?
    3. What are the main differences between single girder
    Read the technical guide

    What is a single girder overhead crane?

    Basic structure

    The core load-bearing part of single girder overhead crane is the main girder, and the overall frame consists of the main girder and the end girders on both sides.

    Most of the crane is installed under the main girder and moves horizontally along the main girder track.

    There are no extra complex parts, the overall assembly logic is simple, and it is a light lifting equipment commonly used in workshops.

    Main Features

    The equipment itself is light in weight and will not cause excessive pressure on the load-bearing structure of the workshop.

    Simple structural design, production, processing and on-site installation procedures.

    The initial purchase and installation of the overall investment is low, suitable for projects with limited budget.

    Mainly used for light and medium lifting operations, can meet the basic handling needs of most traditional workshops.

    Typical applications

    Parts transfer and assembly in general mechanical engineering workshops.

    Lifting, stacking and short distance transfer of goods in warehouses.

    Auxiliary lifting and dismantling of parts in equipment maintenance areas.

    What is a double girder overhead crane?

    Basic structure

    Double girder overhead crane adopts two parallel main girders as the core load-bearing structure and combines with end trolleys to form a stable traveling bridge.

    The lifting trolley is directly arranged on the upper track of the two main girders, which makes the running track more stable.

    Compared with the single girder type, the overall structural rigidity is higher, the load-bearing foundation is more solid, and it is suitable for heavy-duty operation.

    Main features

    The upper limit of rated lifting capacity is higher, which can cope with the continuous lifting of heavy materials.

    The effective lifting height of the hook is larger, which can fully utilize the vertical space of the workshop.

    Adapt to a larger working span, to meet the requirements of the lateral operation of large workshops.

    Easy to install accessories such as grabs, electromagnetic suction cups and special spreaders to expand the scope of use.

    Typical applications

    Transfer of profiles and billets in steel processing enterprises.

    Assembly of large equipment components in heavy machinery workshops.

    Lifting of concrete components in precast production plants.

    Handling and loading of large diameter paper rolls in paper mills.

    Single Girder Overhead Crane
    Single Girder Overhead Crane

    What are the main differences between single girder overhead cranes and double girder overhead cranes?

    Structural differences

    The most intuitive difference between the two types of equipment is the number of main girders: single girder overhead cranes have only one main girder, while double girder overhead cranes have two main girders.

    The number of main girders directly determines the load carrying capacity and overall structural rigidity of the equipment, and also affects the stability of subsequent operations.

    Lifting mechanism and trolley arrangement

    The lifting mechanism of single girder overhead crane adopts the lower suspension type, which is located below the main girder and occupies part of the vertical space.

    The trolley of double girder overhead crane is arranged on the top of the main girder, with a more regular running track and more reasonable space utilization.

    Overall Performance Differences

    Influenced by structural differences, double girder overhead cranes have obvious differences in lifting capacity, lifting height, running span, utilization level and running stability.

    These parameters are not paper data, but directly affect the actual operating efficiency and service life of workshop equipment.

    Detailed comparison between single girder overhead cranes and double girder overhead cranes.

    Comparison ItemsSingle Girder Overhead CranesDouble Girder Overhead Cranes
    Lifting CapacityFocus on light to medium load range; not suitable for long-term heavy-duty liftingWider lifting capacity range; mainstream choice for heavy-duty lifting scenarios
    SpanSuitable for small to medium span workshop layout; easy to shake with excessive spanAdaptable to longer spans; stable for cross-area operation in large workshops
    Lifting HeightLower effective lifting height due to under-slung hoist; occupies vertical spaceHigher space utilization; hook can reach closer to the roof with the same workshop clear height
    Duty Class & Working FrequencySuitable for moderate daily operation frequency; not for continuous heavy-duty workHigher structural strength; adaptable to high-frequency, all-weather continuous heavy-duty operation
    Crane Self-weightLighter weight; easier to transport and installHeavier weight; higher requirements for workshop runway beams and overall load-bearing
    CostLower purchase and installation costs; controllable later maintenance costsHigher initial investment; better long-term comprehensive cost-effectiveness in heavy-duty, high-frequency scenarios
    Maintenance & AccessSimple structure; convenient replacement of conventional wearing parts and daily inspectionEquipped with special maintenance platforms; easier maintenance of large components such as trolley and bridge
    Customization CapabilityLimited customization space; mostly suitable for standard lifting needsStrong customization adaptability; can be modified for special industry needs
    Double Girder Overhead Crane
    Double Girder Overhead Crane

    Advantages of single girder overhead crane

    Lower initial purchase cost, suitable for small and medium-sized workshops with limited budget.

    Lower wheel loads, reducing wear and stress on the workshop track beams.

    Lower requirements on the load-bearing capacity of the workshop building, which can be easily adapted to the remodeling of the old workshop.

    Simple installation process, short construction period, can be quickly put into use.

    Advantages of double girder overhead crane

    Wider range of lifting capacity to cope with all kinds of lifting needs from conventional to heavy duty.

    High vertical space utilization and better effective lifting height performance.

    Better operational stability and durability at large spans and high load levels.

    Customized adaptability to meet the precise lifting requirements of special industrial production.

    When to choose a single girder overhead crane?

    Applicable working conditions

    Daily lifting of materials with light to medium loads, without the need for overweight lifting.

    The project budget is limited, and you want to control the initial investment in equipment.

    The layout of the workshop is conventional, with no special space constraints or complex operation requirements.

    The frequency of daily operation is moderate, not a continuous high-intensity heavy-duty operation.

    Daily operation frequency is moderate, not a continuous high-intensity heavy-duty operation. Only used for regular material lifting, no need to install special spreaders or accessories.

    Application Examples

    Lifting and loading and unloading of small parts in machinery assembly workshop.

    Transferring, stacking and accessing of spare parts in warehouses.

    Routine material handling operations in small fabrication shops.

    Equipment dismantling and component lifting assistance in general maintenance workshops.

    When to choose a double girder overhead crane?

    Suitable conditions

    Heavy materials need to be lifted and the lifting capacity is medium to heavy duty.

    The daily operation frequency is high and belongs to the continuous heavy load operation mode.

    The workshop has a large span or requires a large effective lifting height.

    Need to cooperate with special spreader to complete precise lifting or special process operation.

    Considering the future expansion of production capacity, the equipment needs to reserve space for upgrading and remodeling.

    Application Examples

    Handling of heavy steel and billets in steel warehouses and fabrication shops.

    Lifting and changing of large molds in mold shops.

    Assembly of complete machines and docking of components in heavy equipment assembly workshops.

    Handling of large diameter paper rolls and loading and unloading of production lines in paper mills.

    Full process material lifting and transfer operations on large industrial production lines.

    Key factors to consider before selection

    Lifting Capacity

    First calculate the maximum weight of material to be lifted in the workshop per day, taking into account the weight of the spreader and slings.

    Reserve a reasonable safety margin. Don't blindly choose high-capacity, and don't affect production due to insufficient tonnage.

    Do not blindly choose a large tonnage, nor should production be affected by insufficient tonnage.

    Accurately measure the distance between the two columns in the workshop to determine the required span size of the equipment.

    Improperly matched spans will not only affect operational efficiency, but also pose a safety hazard.

    Lifting height

    Combine the net height of the workshop, the stacking height of materials and the travel of the spreader to calculate the actual lifting height required.

    Avoid that the lifting height is not enough to complete the lifting operation after the equipment is installed.

    Workshop structure

    Understand the load-bearing capacity of the workshop, the specification of track beams and the installation conditions.

    When remodeling an old workshop, focus on checking the building load-bearing data to avoid overweighting the equipment.

    Daily working time and working level

    Select the equipment with the appropriate working class according to the daily working time and frequency.

    Using low load rating equipment under high frequency operation will accelerate equipment aging and increase the probability of failure.

    Budget

    Comprehensively consider the full-cycle costs of initial purchase, installation and post maintenance.

    Do not focus only on the initial price and ignore the hidden costs of long-term use.

    Future Production Needs

    Consider the possibility of future capacity increases and material weight increases.

    Reserve space for equipment upgrades or remodeling in advance to avoid repeated investment at a later stage.

    Reserve space for equipment upgrading or remodeling in advance to avoid repeated investment at a later stage.

    If there are special environments such as high temperature, dust, corrosion, explosion-proof, etc. in the workshop, the equipment with corresponding protection level should be selected.

    The special environment will affect the selection of equipment and configuration plan, and cannot be generalized.

    Common mistakes made by buyers when comparing single girder cranes and double girder cranes

    Selection based on initial price only

    Compare only the price, ignoring the quality of the equipment, working level, adaptability and after-sales guarantee.

    Low price choices may seem to save money, but subsequent failures and frequent downtime will add more costs.

    Ignoring workshop height restrictions

    Without prior calculation of the lifting height, the equipment is installed and the hook is found to be unable to reach the specified height.

    The space occupation of single girder underslung hoists is a detail that many buyers tend to overlook.

    Neglecting the working load

    Using equipment with a low working load rating for high-frequency heavy-duty operations leads to fatigue of the equipment structure and rapid wear of components.

    This not only shortens the service life of the equipment, but also increases the safety risk during lifting.

    No consideration for future expansion

    Only meet the current production demand. After the future capacity increase, the equipment cannot adapt to the new operating requirements.

    The equipment can only be replaced, resulting in a waste of resources and delays.

    Assuming that double girder is always a better choice

    Blindly choosing double girder cranes in small and light workshops will cause budget waste and space occupation.

    The core of selection is to adapt to local conditions, and not blindly pursue high-end equipment.

    Mismatch between crane type and actual application

    The use of single girder for heavy loads and double girder for light loads will reduce operational efficiency.

    Mismatch between equipment and working conditions will also increase the difficulty of maintenance and the cost of use.

    What information should you provide to the crane supplier?

    Basic technical details

    Specify the rated lifting capacity, running span and effective lifting height of the equipment.

    Inform about the length of the trolley run, the voltage and frequency of the workshop power supply.

    These basic parameters are the core basis for the manufacturer's customized solutions.

    Workshop details

    Provide architectural drawings of the workshop, indicating the location, dimensions and load-bearing data of the runway beams.

    Indicate the available clear height of the workshop and attach site photos.

    Facilitate the manufacturer to judge the feasibility of equipment installation and give a reasonable installation plan.

    Application details

    Describe the type, shape and unit weight of the lifted material.

    Inform the frequency of daily operation, working environment and shift arrangement.

    Frequently Asked Questions

    Is a double girder crane necessarily stronger than a single girder crane?

    In terms of structural rigidity and load capacity, double girder is indeed more advantageous.

    However, under the regular situation of light load and low frequency, qualified single girder equipment can also operate stably, and there is no absolute difference between strong and weak.

    Is the maintenance cost of single girder crane lower?

    Single girder has a simple structure, easy replacement of wearing parts, and lower labor hours and costs for routine maintenance.

    It is suitable for workshops with limited budget and only basic lifting needs.

    Which crane has a higher hook height?

    In the case of the same net height of the workshop, double girder overhead crane has higher space utilization and better effective lifting height.

    While single girder cranes lose some vertical space due to insufficient lifting height.

    Can single girder cranes be used for heavy duty work?

    The upper limit of lifting capacity of single girder crane is limited. The upper limit of lifting capacity of single girder crane is limited. Prolonged heavy-duty work will damage the structure, so it is not recommended for heavy-duty occasions.

    To ensure safety and equipment longevity, double girder overhead cranes are preferred for heavy duty work.

    Which type is more suitable for new workshop projects?

    When choosing a crane for a new workshop, a comprehensive judgment should be made based on capacity planning, material weight and span size.

    Choose single girder for light conventional production and double girder for heavy or large workshops, which can be reserved for upgrading in advance.

    Discuss the crane arrangement for your project.

    Girder count alone does not settle the selection. Compare the lifting mechanism, hook envelope, runway loading and required working duty using configuration-specific drawings and technical data. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Single-Girder Bridge Crane

    View product parameters
    Lifting capacity: 1–20 tSpan: 7.5–31.5 mLifting height: 6, 9, 12, 18, 24 or 30 m; capacity-dependent

    Use an LDA single-girder bridge and electric hoist for general workshop material handling. Select the lifting capacity, runway geometry and hoist duty around the building and load.

    LH Electric Hoist Double Girder Crane

    View product parameters
    Lifting capacity: 3, 5, 10, 16, 20 tSpan: 10.5–31.5 mLifting height: 6, 9, 12 or 18 m

    Use an LH double-girder bridge with an electric-hoist trolley for workshop lifting, assembly and maintenance. Match the hoist arrangement to the suspended load, hook travel and available building space.

    Updated 2026 · Henan Mine Crane

  • Single- vs Double-Girder Gantry Cranes: Site and Duty Comparison

    Single- vs Double-Girder Gantry Cranes: Site and Duty Comparison

    Technical guide

    Single- vs Double-Girder Gantry Cranes: Site and Duty Comparison

    The appropriate gantry structure depends on the lifting task and supporting site. Compare span, hook positions, travel arrangements and operating cycle before developing either configuration into a project proposal.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    Single- vs Double-Girder Gantry Cranes: Site and Duty Comparison
    Henan Mine Crane lifting equipment
    Project planning notes

    Key points for this crane project.

    1. What is a Single Girder Gantry Crane
    2. What is a Double Girder Gantry Crane
    3. Single vs. Double Girder Gantry Cranes: Key
    Read the technical guide

    What is a Single Girder Gantry Crane

    Single girder gantry crane consists of a main girder, two support legs, the bottom of the support legs are equipped with wheels or rails, mobile operations can be realized; lifting trolley installed in the lower flank of the main girder, the electrical equipment is integrated in one of the support legs of a small control room.

    Advantages

    • Cost-effective: Compared with double girder gantry cranes, single girder models have a simpler structure, require less manufacturing materials, and have lower upfront procurement costs, making them ideal for small and medium-sized enterprises with tight budgets (keywords: economical gantry cranes, low-cost lifting equipment).
    • Strong versatility: according to the operational requirements of the flexible configuration of spreader, such as lifting beams, electromagnetic suction cups, hooks, etc., can be adapted to a variety of types of cargo handling, covering a variety of areas such as light manufacturing, small warehousing.
    • Convenient installation and maintenance: simple structure, few moving parts, relatively simple installation process, without the need for professional large-scale equipment to assist, low maintenance workload, low cost, can minimize downtime, to protect the continuity of production.
    • Saving space: Vertical occupation of space is smaller, lower requirements for plant floor height, especially suitable for workshops, warehouses and other scenes with limited headroom (keywords: low headroom gantry crane, compact lifting equipment).

    Disadvantages

    • Limited load capacity: can only bear light and medium loads, cannot meet the lifting needs of heavy goods, if forced overloading operations, it will seriously affect the life of the equipment and operational safety.
    • Poor stability: the single main girder structure has weak resistance to lateral movement, and is prone to shaking during operation, so the operating speed needs to be strictly controlled to avoid safety accidents.
    • Limited span and lifting height: Compared with double girder models, the span and lifting height of single girder gantry cranes have obvious limitations, which cannot cover large operation areas or meet the demand for overhead lifting.

    What is a Double Girder Gantry Crane

    A double girder gantry crane consists of two parallel main girders, four support legs with wheels or rails at the bottom of the legs, a hoisting trolley installed between the two main girders, and the electrical equipment placed in a separate control room.

    Advantages

    • Higher safety: sturdy structure, excellent stability, not easy to shake, tipping and other problems, higher accuracy of load control during operation, and can be equipped with a variety of safety protection devices to further reduce operational risks.
    • Outstanding versatility and durability: the configuration can be customized according to the heavy-duty operation requirements, suitable for a variety of heavy cargo handling; the body is made of high-strength steel, corrosion-resistant, wear-resistant, adaptable to harsh operating environments, and longer service life.

    Disadvantages

    • Higher cost: the double main girder structure requires more materials and more complicated manufacturing process, the initial procurement cost is much higher than the single beam model, and at the same time, the installation process requires specialized equipment and technicians, which further increases the initial investment.
    • Large space requirement: The larger size of the machine body not only requires more space for installation and operation, but also has higher requirements for the height of the factory building and the ground load-bearing, which is unsuitable for the use of small sites.
    • Complicated installation: Complex structure, large weight, cumbersome installation process, requiring a professional engineering team to conduct site surveys, foundation pouring and equipment assembly, which takes a long time.
    • High maintenance and energy cost: more moving parts, more complex structure, the later need for regular professional overhaul and maintenance, maintenance costs are high; at the same time, the equipment operation needs to consume more electricity, long-term operation of energy costs can be considerable.
    Single- vs Double-Girder Gantry Cranes: Site and Duty Comparison
    Lifting equipment and application context

    Single vs. Double Girder Gantry Cranes: Key Differences

    The core differences between single girder and double girder gantry cranes are centered on the structure, performance, cost and other dimensions, clear these differences is the key to selection, the specific comparison is as follows:

    Structural Design

    Structural design is the most essential difference between single girder and double girder gantry cranes, which directly determines the equipment’s carrying capacity, stability and applicability of the scene, the two in the structure of the construction of the differences are significant, the specific details are as follows:

    • Single girder gantry crane: using a single I-beam or box girder as the main girder, the structure is light and simple, light weight; hoisting trolley mounted on the lower flange rail of the main girder, the design is simplified, the installation of the foundation requirements are low, suitable for small and medium-sized venues and the foundation conditions of the general plant for rapid installation.
    • Double Girder Gantry Crane: two parallel main girders form a solid frame through the end beams, the structure is sturdy and heavy, strong load-bearing; hoisting trolley mounted on the special track between the main girders, which can enhance the stability and disperse the load, and has very high requirements on the foundation load-bearing and stability, which is suitable for large industrial sites.

    Load Capacity

    Load capacity is the primary consideration in the selection of indicators, which directly determines whether the equipment can meet the actual operational requirements, single girder and double girder models of the load capacity difference is obvious, and adaptable to very different operational scenarios:

    Span and Lifting Height

    Span (the distance between the support points at both ends of the main girder) and lifting height (the maximum height that the hook can lift) directly determine the operating range of the equipment, and both need to be selected in conjunction with the site conditions and operational requirements:

    Design Complexity

    Design complexity directly affects the manufacturing cost, installation cost and later maintenance cost of the equipment. The design difference between single girder and double girder models is large, resulting in a significant difference in the overall cost:

    • Single girder gantry crane: simple structure, streamlined materials, low process difficulty, low procurement and installation costs in the early stage and short cycle; fewer moving parts in the later stage, convenient maintenance operations, cost-controllable, the overall cost-effective advantage is significant.
    • Double girder gantry cranes: complex structure, sufficient materials, process and precision requirements, high procurement costs in the early stage; installation requires a professional team to operate, the cycle is longer and higher costs; later maintenance process is cumbersome, high cost, the overall early and long-term investment are at a higher level.

    Lifting Mechanism

    Lifting mechanism is the core working part of the gantry crane, which directly determines the lifting capacity and operational efficiency of the equipment, single girder and double girder models are equipped with significant differences in the lifting mechanism according to their own load requirements, as follows:

    • Single girder gantry crane: mainly equipped with electric hoist or small wire rope hoist, the lifting mechanism is simple and compact, suitable for light and medium-sized lifting loads, easy to operate and cost-controllable, perfectly suited to the single girder model of light and medium-sized operations of the core positioning.
    • Double Girder Gantry Cranes: Equipped with heavy-duty wire rope hoists, the hoisting mechanism has a sturdy structure, strong lifting capacity and stable operation, which is suitable for all kinds of heavy-duty loads, and can realize accurate and smooth hoisting of loads, effectively guaranteeing the safety of heavy-duty operations, which is in line with the core positioning of the double girder model for heavy-duty operations.

    Mobility and Flexibility

    Mobility and flexibility mainly depend on the weight, volume and structural design of the equipment, which directly affects the adaptability and operational flexibility of the equipment in different sites, the differences between single girder and double girder models are as follows:

    • Single girder gantry crane: light body, compact size, excellent maneuverability, flexible mobile operation, adaptable to the narrow operating space, and easy to frequently adjust the lifting point position, enhance operational flexibility and efficiency.
    • Double girder gantry crane: bulky body, large volume, weak mobility, usually semi-fixed installation, more suitable for large, fixed work area of long-term lifting tasks, not suitable for frequent mobile adjustment.

    Control Mode

    The control mode directly affects the ease of operation, precision and safety of the equipment, and needs to be selected in conjunction with the operational scenarios and operational requirements, and the difference between the control mode of single girder and double girder models is obvious:

    Application Scenarios for Single and Double Girder Cranes

    The core of the selection is “matching scene”, single girder and double girder gantry crane application scenarios are significantly different, combined with their own operational needs can quickly lock the model:

    Single Girder Gantry Crane

    1. Small and medium-sized manufacturing workshops, machining factories and small warehouses, can be used for light goods, various types of parts handling and lifting operations, to match the light load daily operational needs.
    2. Light assembly lines, equipment maintenance workshops, suitable for equipment overhaul, parts assembly, small mold handling, as well as motor disassembly, HVAC equipment installation and other types of daily maintenance operations.
    3. It is suitable for sites with limited headroom and small operating areas, and also for small and medium-sized enterprises with tight budgets and no excessive requirements for equipment loading capacity.

    Double Girder Gantry Cranes

    1. Iron and steel plants, shipyards, large construction sites, mainly used for heavy steel, ship components, large construction materials lifting operations (keywords: shipyard gantry cranes, lifting equipment for iron and steel mills), to meet the core lifting needs of heavy industry.
    2. Heavy machinery manufacturing plants, large processing and assembly workshops, for large machine tools, heavy molds, large components of the handling and assembly, to meet the needs of heavy equipment production and installation.
    3. Large warehouses, port terminals and open-air workplaces, suitable for lifting and handling of large cargoes and containers, and can carry out long-term heavy-duty operations in harsh environments to ensure operational efficiency and stability.
    Single- vs Double-Girder Gantry Cranes: Site and Duty Comparison
    Crane arrangement for technical discussion

    Cost Comparison

    When selecting the type, cannot only look at the preliminary procurement costs, need to consider the long-term operating costs, in order to make the most cost-effective decision, the specific cost comparison is as follows:

    Upfront Cost

    • Double girder gantry crane: high procurement costs, due to differences in materials and manufacturing process, the price is much higher than single girder models; complex installation process, the need for professional foundation survey, pouring, and large-scale equipment lifting, installation costs are higher, the initial investment is larger.

    Long-term Cost

    • Single girder gantry crane: simple structure, few moving parts, low maintenance frequency and low maintenance cost in the later stage; low energy consumption of the equipment, controllable cost of electricity for long-term operation, suitable for long-term light load operation.
    • Double girder gantry crane: complex structure, many moving parts, need to regularly carry out professional overhaul and maintenance, maintenance costs are higher; equipment energy consumption is higher, long-term operation of the electricity cost is higher, and at the same time need to be equipped with professional operators, the cost of labor will also increase.

    Cost-benefit Analysis

    • Single girder gantry crane: outstanding cost-effectiveness, low initial investment, low long-term operating costs, suitable for small and medium-sized enterprises with limited budgets, light operating loads and low operating frequency, which can meet the basic lifting needs at a lower cost.
    • Double girder gantry crane: large investment in the early stage, but strong load capacity, good stability, long service life, suitable for the need for long-term heavy-duty operations, high requirements for operational efficiency and safety of the enterprise, in the long term, its performance advantages can offset the high investment in the early stage, bringing higher operational efficiency.

    Factors to Consider When Choosing Between Single and Double Girder Gantry Cranes

    Combined with their own operational needs, site conditions and budget, follow the following five core factors, you can quickly make the right choice:

    Operating Environment and Space

    If it is indoor operation, small space or limited headroom, single girder model is preferred; if it is outdoor operation, open space, and needs to meet the demand of large span or high altitude lifting, double girder model is preferred. At the same time, it is important to consider the ground bearing capacity, double girder models due to their own weight and load demand, the ground bearing requirements are higher.

    Budget and Cost Effectiveness

    If the enterprise has a tight budget and only needs short-term operation or daily light-load operation, choosing single girder model is more economical; if the budget is sufficient and needs long-term heavy-duty operation, choosing double girder model is more cost-effective in the long term, which can effectively avoid the operation inefficiency or safety hazards due to the lack of equipment performance in the later stage.

    Long-term Expansion Plan

    If the enterprise has plans to increase the work load and expand the scale of operation in the next few years, it is recommended to choose double girder model, which can effectively avoid the additional purchase cost and downtime loss caused by the replacement of equipment in the later stage, and ensure the continuity of production.

    Working Level

    It is necessary to combine the frequency of operation and load intensity to choose the appropriate level of work: single girder models are suitable for light and medium operations of class A-D, which have a low frequency and light load; double girder models are suitable for heavy operations of class E-F, which have a high frequency and high load intensity.

    When to Choose a Single Girder Gantry Crane

    If one of the following scenarios is met, single girder gantry cranes are preferred to minimize cost and improve operational efficiency:

    1. The frequency of operation is low and belongs to A-D light and medium operations, such as daily parts handling and equipment maintenance in small workshops.

    When to Choose a Double Girder Gantry Crane

    If one of the following scenarios is met, double girder gantry cranes are preferred to ensure operational safety and efficiency:

    1. Heavy duty operations with high frequency and high load intensity, such as continuous heavy lifting operations in shipyards and steel mills.

    Key Considerations: When selecting cranes, it is necessary to combine factors such as crane operating speed, work cycle efficiency, maintenance resource allocation, etc., and at the same time ensure that the equipment is equipped with overload protection, collision avoidance system and other perfect safety protection devices, to protect the safety of heavy-duty operations in all aspects.

    Common Mistakes to Avoid When Selecting

    Many companies in the selection of the following misunderstandings, resulting in waste of equipment, increased costs or safety hazards, need to focus on avoidance:

    • Underestimation of load capacity: Considering only static loads and ignoring dynamic loads (e.g. shaking and inertia during lifting) and spreader weights, resulting in long-term overloading of equipment, accelerating wear and tear of parts, and even causing safety accidents.
    • Mismatch between work level and operational requirements: Use light and medium work level single girder models for heavy and high frequency operations, resulting in early aging and frequent failures of the equipment, increasing maintenance costs and downtime losses.
    • Ignoring space and site conditions: blindly choosing double girder models and ignoring the problems of small sites and insufficient headroom, resulting in equipment that cannot be properly installed and operated; or choosing single girder models that cannot meet the needs of large-span and high-altitude lifting.
    • Focusing only on upfront costs: choosing single girder models with insufficient load or span to save upfront investment, and then needing to purchase additional equipment or upgrading and remodeling at a later stage due to the inability to meet the operational needs, which in turn increases the overall cost.

    Discuss the crane arrangement for your project.

    The appropriate gantry structure depends on the lifting task and supporting site. Compare span, hook positions, travel arrangements and operating cycle before developing either configuration into a project proposal. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Single-Girder Bridge Crane

    View product parameters
    Lifting capacity: 1–20 tSpan: 7.5–31.5 mLifting height: 6, 9, 12, 18, 24 or 30 m; capacity-dependent

    Use an LDA single-girder bridge and electric hoist for general workshop material handling. Select the lifting capacity, runway geometry and hoist duty around the building and load.

    LH Electric Hoist Double Girder Crane

    View product parameters
    Lifting capacity: 3, 5, 10, 16, 20 tSpan: 10.5–31.5 mLifting height: 6, 9, 12 or 18 m

    Use an LH double-girder bridge with an electric-hoist trolley for workshop lifting, assembly and maintenance. Match the hoist arrangement to the suspended load, hook travel and available building space.

    Updated 2026 · Henan Mine Crane

  • Shipyard Gantry Crane Buying: Block Geometry and Assembly Coverage

    Shipyard Gantry Crane Buying: Block Geometry and Assembly Coverage

    Technical guide

    Shipyard Gantry Crane Buying: Block Geometry and Assembly Coverage

    Shipbuilding equipment must serve the vessel blocks and assembly positions in the yard. Provide the load geometry, handling sequence and required coverage so the crane arrangement can be reviewed with the site layout.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    Shipyard Gantry Crane Buying Guide For Large Vessel Construction
    Shipyard Gantry Crane Buying Guide For Large Vessel Construction
    Project planning notes

    Key points for this crane project.

    1. Understanding Shipyard Gantry Cranes and Their
    2. Key Factors When Buying a Shipyard Gantry Crane
    3. How to Choose the Right Gantry Crane Design for
    Read the technical guide

    Understanding Shipyard Gantry Cranes and Their Applications

    What is a shipyard gantry crane?

    Henan Mine Crane manufactured shipyard gantry cranes working principle is to drive the lifting system through an electrical control system to complete the vertical lifting of heavy objects. The lifting system includes hooks, wire ropes, hoisting mechanisms and other components. At the same time, it cooperates with the horizontal movement of carts and trolleys to achieve precise positioning and handling of heavy objects such as hull segments and heavy equipment. The cart is the overall frame, and the trolley is a lifting device that moves along the main girder. The core components work together to ensure the stability and reliability of the equipment under high-load and high-frequency operations. It is an indispensable marine lifting system in the process of ship construction.

    Applications in vessel construction

    Shipyard gantry cranes are the core equipment of large-scale ship construction and run through the whole process of hull construction. The main application scenarios include the following aspects. They are indispensable ship construction equipment in the ship construction process.:

    • Hull segmented hoisting and assembly: Accurately hoisting the prefabricated hull segments to the ship platform or dock, and completing the segmented docking and welding is the core process of hull forming. Hull segments include bottom segments, side segments, deck segments, etc.
    • Segmented hull transportation: Realize the efficient transfer of hull segments between workshops, depots and ship platforms, reduce the workload of manual handling, and improve operational efficiency.
    • Marine equipment installation: responsible for the hoisting and installation of heavy marine equipment such as main engine, steering gear, anchor gear, etc., to ensure that the installation location of the equipment is accurate and meets the performance requirements of the ship's operation.
    • Handling of heavy-duty components: handle the handling and positioning of heavy-duty steel, modules, outfitting parts and other heavy objects in the process of ship construction, and adapt to the high-load operation requirements of large-scale ship construction.

    Why shipyards need heavy duty gantry cranes

    The particularity of large-scale ship construction determines that shipping companies must be equipped with heavy-duty shipyard gantry cranes. Its core advantages and necessity are mainly reflected in the following points:

    • Carrying extreme loads: the hull segments and heavy equipment of large ships can weigh hundreds or even thousands of tons. Ordinary lifting equipment cannot meet the load requirements. Heavy gantry cranes can easily handle the lifting of heavy objects of extreme weight.
    • Improve construction efficiency: heavy-duty gantry cranes can realize one-time hoisting and assembly of large components, reduce operating processes and time, significantly shorten the ship construction cycle, and improve the production capacity and delivery capacity of shipping companies.
    • Reduce labor risks: reduce the participation in manual handling, avoid safety risks caused by manual operation, and reduce the risk of collision and damage to components through precise control to ensure operation safety.
    • Adapt to the needs of large-scale shipbuilding: With the intensification of the trend of large-scale and modular construction of ships, Henan Mine Crane manufacturedheavy gantry cranes can support the construction needs of large-scale ships, offshore platforms and other equipment, and help shipping companies expand their business scope and enhance their market competitiveness.

    Key Factors When Buying a Shipyard Gantry Crane

    The procurement of gantry cranes for shipyards is a systematic project that needs to be comprehensively considered in combination with the actual production needs of shipping companies, site conditions, future development plans and other factors. The following core selection points can help shipping companies accurately select suitable equipment. This shipyard crane selection guide will provide you with clear decision-making ideas.

    Lifting capacity

    The lifting load is the core parameter of the gantry crane selection, which directly determines whether the equipment can meet the operational needs of ship construction. When selecting the type, it must be comprehensively determined in combination with the size of the ship, the construction process and the future development plan. Ship types include bulk carriers, tankers, LNG ships, etc. Finally, it is necessary to consider the future production expansion needs of shipping companies. If they plan to build larger-tonnage ships, the lifting load of the equipment should be appropriately increased to avoid cost waste caused by subsequent repeated purchases.

    Span and lifting height

    The span and lifting height are the key dimensional parameters of the gantry crane, which need to be accurately matched with the layout, operating scope and ship construction requirements of the shipyard, and are also the core content of the specifications of the gantry crane of the shipyard. Span refers to the distance between the operating tracks on both sides of the gantry crane. It needs to be determined according to the width of the platform or dock and the maximum size of the hull segment to ensure that the equipment can cover the entire working area and realize the all-round hoisting and assembly of the hull segment. The lifting height needs to be determined according to the draft depth of the ship, the height of the hull and the operating scene.

    Working class and duty cycle

    The working level and operating cycle determine the design standard and service life of the gantry crane. It needs to be selected in combination with the operating frequency and load characteristics of the shipping company to adapt to the high load requirements of continuous ship construction. The working level is divided according to the frequency of use of the equipment and the load state. Henan Mine Crane manufactured Shipyard gantry cranes usually need to choose a high working level of A6-A8 to adapt to high-frequency and high-load continuous operation scenarios. The operation cycle needs to consider the daily number of hoisting, the length of a single operation, load changes and other factors. High-frequency operation scenarios need to choose equipment with efficient lifting and operating speed, while optimizing the structural design of the equipment and the selection of components to ensure that the equipment can operate stably for a long time and reduce downtime.

    Operating environment

    Long-term operation of gantry cranes in shipyards in outdoor environments requires full consideration of the impact of environmental factors on equipment performance and service life, focusing on the following points. First, the particularity of the outdoor operating environment requires consideration of factors such as temperature changes and rainwater erosion. The electrical components and metal structures of the equipment need to have good protective properties to avoid equipment failures due to environmental factors. The second is the problem of salt spray corrosion. The air humidity and high salt content in coastal shipyards can easily cause corrosion to the metal structure and electrical components of the equipment. It is necessary to choose equipment with salt spray protection and corrosion-resistant treatment, such as the use of galvanized, anticorrosive coating and other processes to enhance the corrosion resistance of the equipment.

    How to Choose the Right Gantry Crane Design for Shipbuilding

    The design type of gantry crane in a shipyard directly affects the performance, applicable scenarios and procurement costs of the equipment. It is necessary to select the appropriate design plan based on the actual needs of the shipping company, site conditions and operating scenarios to ensure that the equipment can be efficiently adapted to the needs of ship construction.

    Single girder vs double girder design

    The single-beam gantry crane has a simple structure, light weight and low procurement cost. It is suitable for small and medium-sized loads and small-span operation scenarios, but its carrying capacity and stability are relatively poor, and it cannot meet the high-load requirements of large-scale ship construction. The double-beam gantry crane adopts two main beams as load-bearing components. It has high structural stiffness, strong carrying capacity and good stability. It can withstand the impact of heavy loads and long-term fatigue operations. At the same time, it has better wind resistance and positioning accuracy, and is suitable for the high-load and high-precision operation requirements of large-scale ship construction. In addition, the double-beam gantry crane has a longer service life, relatively low maintenance costs, and higher cost performance for long-term use, so it has become the mainstream choice for large-scale ship construction.

    Rail mounted vs rubber tyred gantry crane

    Henan Mine Crane manufactured Rail mounted gantry cranes need to lay special tracks on both sides of the ship platform or dock, and the equipment runs vertically along the track. It has the advantages of good operating stability, strong carrying capacity, and high positioning accuracy. It is suitable for large-scale ship construction scenarios with fixed operating areas and high-frequency operations. It is the mainstream choice for shipyards. Tire-type gantry cranes use rubber tires as operating components without laying tracks. They have the advantages of flexible movement and adjustable operating range. They are suitable for scenarios where the site is limited and the operating area is not fixed, but the carrying capacity is relatively low, and the positioning accuracy is slightly inferior to that of rail-type equipment.

    Customized crane configuration

    Customized configuration mainly includes the following aspects: first, customized lifting mechanism, according to the type, weight and lifting needs of heavy objects, design special lifting mechanisms, such as double hook lifting, multi-lifting point lifting, etc., to improve the stability and accuracy of lifting. The second is the configuration of a multi-lifting system. For the lifting needs of large components, multiple lifting devices can be configured to achieve synchronous lifting and collaborative operation, and improve operating efficiency. The third is the intelligent control option, which is equipped with intelligent technologies such as automatic control, remote monitoring, and precise positioning to realize intelligent control of equipment, reduce manual intervention, and improve operational safety and efficiency. Fourth, the remote operating system supports remote control of equipment, reduces the labor intensity of operators, and avoids operators from being in a dangerous operating environment.

    Manufacturing and Quality Standards of Shipyard Gantry Cranes

    The manufacturing quality of the Henan Mine Crane manufactured shipyard gantry crane directly determines the performance, safety and service life of the equipment. When purchasing, it is necessary to choose a shipyard gantry crane manufacturer with professional manufacturing capabilities and strict quality control system to ensure that the equipment meets industry standards and actual needs.

    Engineering design process

    Professional engineering design is the basis for ensuring the performance of gantry cranes. Manufacturers need to have a sound design process and provide personalized design solutions based on customer needs. First of all, in-depth analysis of the actual needs of customers, including ship types, operating scenarios, site conditions, future development plans, etc., to clarify the core parameters and performance requirements of the equipment. Secondly, conduct detailed structural calculations and simulation analysis to verify the structural strength, stability, and wind resistance of the equipment to ensure the rationality and safety of the design plan. Finally, optimize the structural design and component selection of the equipment, balance the performance, cost and service life of the equipment, and provide customers with the best design plan.

    Manufacturing process

    Strict manufacturing technology is the key to ensuring the quality of equipment. Manufacturers need to follow standardized manufacturing processes to ensure that every link meets the quality requirements. The crane manufacturing process mainly includes the following links. First, steel processing, the selection of high-strength steel that meets the standards, cutting, welding, machining and other processing to ensure the dimensional accuracy and structural properties of steel. The second is the welding process. Professional welding equipment and technology are used to ensure the welding quality and avoid damage to the equipment structure caused by welding defects. At the same time, the welding parts are tested for defects to ensure that the welding quality is qualified.

    Third, surface treatment, anti-corrosion treatment of the metal structure of the equipment, such as galvanized, spraying anti-corrosion coating, etc., to enhance the corrosion resistance of the equipment and extend the service life of the equipment. The fourth is the assembly of components. The processed components are accurately assembled to ensure the matching accuracy of each component. At the same time, the assembled equipment is preliminarily debugged to ensure the normal operation of the equipment.

    Testing before delivery

    Testing of equipment before leaving the factory is the last line of defense to ensure the quality of equipment. Manufacturers need to conduct comprehensive testing and verification to ensure that the equipment meets industry standards and customer needs. The core links of industrial crane quality control include. First, load testing, which performs rated load and overload tests on the equipment, verifies the carrying capacity and operating stability of the equipment, and ensures that the equipment can meet the actual operating needs. The second is electrical inspection, which comprehensively inspects the electrical control system, circuits, and components to ensure that the electrical system is operating normally and there are no hidden dangers of failure. The third is the verification of the safety system, and the safety devices such as overload protection, anti-collision system, and emergency stop system are tested one by one to ensure that the safety devices can work normally and ensure the safety of operations.

    Henan Mine Crane

    Shipyard gantry cranes are the core equipment of large-scale ship construction. Every aspect of their selection, design, manufacturing, installation and commissioning directly affects the production efficiency, operational safety and long-term development of shipping companies. Choosing the right shipyard gantry crane cannot only improve the efficiency and quality of ship construction, reduce operating costs and safety risks, but also help shipping companies expand their business scope and enhance their market competitiveness.

    I would like to remind all shipping companies that when purchasing gantry cranes for shipyards, they need to take into account their actual needs, pay attention to the performance, quality and professional services of the equipment, and choose a reliable Henan Mine Crane Factory. Through reasonable selection, high-quality equipment and professional services, we will create an efficient, safe and reliable ship construction system to promote shipping companies to achieve long-term stable development and build a more competitive modern shipyard.

    Discuss the crane arrangement for your project.

    Shipbuilding equipment must serve the vessel blocks and assembly positions in the yard. Provide the load geometry, handling sequence and required coverage so the crane arrangement can be reviewed with the site layout. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Anode Carbon Block Stacking Crane

    View product parameters
    Lifting capacity: 10 – 30 tSpan: 13.5-40 mLifting height: 6 – 20 m

    Handle and stack anode carbon blocks with a crane configured around block geometry, gripping method and storage layout. Define the transfer sequence and automation interfaces before selection.

    Shipbuilding Gantry Crane

    View product parameters
    Lifting capacity: 100 t, 200 t, 250 t, 450 tSpan: 40 – 97 mLifting height: 35 – 70 m

    Lift ship blocks and large assemblies with a shipbuilding gantry configured for the dock and production layout. Define lifting points, trolley functions and any block-turning sequence before selection.

    Updated 2026 · Henan Mine Crane

  • Shipbuilding Gantry Crane Parameters: Trolleys, Height and Supplier Scope

    Shipbuilding Gantry Crane Parameters: Trolleys, Height and Supplier Scope

    Technical guide

    Shipbuilding Gantry Crane Parameters: Trolleys, Height and Supplier Scope

    Shipyard proposals need more definition than a maximum capacity. State the required load handling, hook positions and trolley coordination, then compare the documents and responsibilities included in each offer.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    reliable gantry crane supplier for shipyards
    reliable gantry crane supplier for shipyards
    Project planning notes

    Key points for this crane project.

    1. The main application scenarios of shipbuilding
    2. Shipbuilding projects on the core requirements of
    3. Mainstream shipbuilding gantry crane models suitable
    Read the technical guide

    The main application scenarios of shipbuilding gantry cranes

    Shipbuilding gantry cranes are designed around the shipyard's open-air, heavy-duty, wide-ranging operations to build, covering the entire process of ship construction, maintenance, offshore prefabrication, is the core equipment indispensable to port shipyards, offshore engineering bases.

    Hull Segment Assembly Operation

    Modern ship construction adopts the construction mode of segment prefabrication and overall closing, and large hull segments are extremely heavy and bulky, and the requirements for lifting and positioning accuracy are harsh.

    Professional shipbuilding gantry cranes can smoothly complete the lifting, shifting and accurate docking of huge hull segments to ensure the construction accuracy of the hull together, which is the core equipment for the construction of the main body of the ship.

    Shipyard steel structure material transfer

    In the process of ship production, a large number of ship plates, steel sections, prefabricated modules and all kinds of hull supporting components are required. These materials are stacked in scattered, different tonnage, need to be adapted to the heavy-duty lifting equipment to complete the field of normalized transfer.

    Reliable shipyard gantry crane manufacturers will optimize the operating parameters of the equipment according to the material specifications, to adapt to high-frequency, multi-category steel lifting operations, to adapt to the daily production rhythm of the shipyard.

    Construction Scene of Shipyard and Ship Platform

    Dry dock and open platform are the core sites for ship construction, launching and overhauling, and the operation area is open and has a great span. Shipbuilding gantry cranes can fully cover the operation area of the dock, supporting the construction of the entire ship, heavy parts transfer, ship molding supporting operations.

    This type of scenario requires high requirements for equipment stability, wind resistance and continuous operation performance, and ordinary civilian gantry cranes are unable to meet the construction standards.

    Nacelle heavy equipment installation

    Ship main engine, generator sets, large piping equipment and other nacelle core parts, high deadweight, large volume, and installation position precision, the smoothness of lifting and alignment accuracy has high requirements.

    Exclusive offshore gantry cranes can realize low-speed and smooth lifting, accurate positioning, avoiding problems such as equipment bumping and installation deviation, and guaranteeing the quality of nacelle equipment installation.

    Ship Repair and Remodeling Engineering

    Regular overhaul, structural modification, and replacement of spare parts after the ship is in service also require heavy-duty gantry cranes to cooperate with the construction. Maintenance scenarios have flexible operating points and variable lifting conditions, which require higher adaptability of the equipment.

    Gantry cranes suitable for shipyards can be flexibly adapted to dismantling, shifting, lifting and other types of maintenance processes to meet the needs of the ship's entire life cycle of operation and maintenance construction.

    Offshore Engineering Prefabrication

    In addition to conventional ship construction, prefabrication sites for offshore platforms, pipe rack modules, marine steel structures and other offshore products will also use shipbuilding gantry cranes in bulk.

    These offshore components have high-capacity and special structure, which requires heavy-duty shipyard Cranes to provide stable heavy-duty lifting capacity to suit the production and construction needs of large-scale offshore projects.

    Shipbuilding projects on the core requirements of lifting equipment

    Shipyard lifting equipment selection criteria, and ordinary industrial plants have essential differences. Coastal harsh environment, oversized heavy load, high precision construction requirements, constitute the exclusive selection of shipbuilding Crane threshold.

    Strong heavy-duty lifting capacity

    Most of the hull segments, steel structure modules and cabin equipment lifted in shipyards belong to super-heavy loads, and many of the components have irregular shapes and shifted centers of gravity.

    This requires that the core structure of shipbuilding gantry cranes, such as the main girder, outriggers, traveling mechanism, etc., have sufficient load-bearing redundancy to withstand irregular heavy load operations for a long period of time without structural deformation, operational shaking and other problems.

    Large span and sufficient lifting height

    The operating width of shipyard and ship platform is generally much wider than that of ordinary factory buildings, and the vertical space for the construction of ship hull is also higher. The equipment must have the ability to cover a large span in order to completely cover the whole construction area without any blind spot.

    At the same time, the sufficient lifting height can meet the needs of high-level hull assembly and high level installation of large-scale equipment, and there will be no shortage of lifting space.

    Smooth and synchronized lifting performance

    Large hull segments and offshore modules cannot be lifted at a single point, but require multiple lifting points to work together. If the lifting and running speeds of each lifting point are not consistent, it will lead to uneven force on the components and problems of twisting and offsetting.

    High-quality shipbuilding gantry cranes are equipped with synchronized control systems, which can achieve smooth lifting and precise alignment of multiple points to protect the structural integrity and construction accuracy of large components.

    Suitable for harsh outdoor working conditions along the coast

    The vast majority of shipyards are built near the sea, and the equipment is exposed to strong winds, rainfall, high humidity, and high salt spray environment all year round. Salt spray corrosion, wind attack is the main source of loss of marine Crane.

    Qualified marine cranes must do special anti-corrosion coating, electrical moisture sealing, wind reinforcement treatment, able to withstand the harsh coastal climate for a long time, slow down the aging of the equipment, reduce the frequency of failure.

    High safety factor and structural reliability

    Shipyard heavy lifting is a high-risk operation, once the equipment brake failure, structural failure, will cause huge property losses and safety accidents.

    Regular shipbuilding Crane manufacturers will equip the equipment with multiple safety protection configurations, including reliable braking system, limit protection, collision avoidance devices, with high-strength overall structure, all-round protection of construction safety.

    Long-term operation and maintenance and spare parts supply guarantee

    Shipbuilding gantry cranes belong to large-scale special equipment, the service life of up to more than ten years, the late loss of spare parts, equipment maintenance is the norm.

    Once the equipment is down, it will directly lead to the entire ship construction process stagnation, delaying the schedule. Therefore, the manufacturer's after-sales response speed, long-term spare parts supply capacity, on-site operation and maintenance support is the key to long-term stable operation of the project.

    reliable gantry crane supplier for shipyards
    reliable gantry crane supplier for shipyards

    Mainstream shipbuilding gantry crane models suitable for shipyard projects

    Different shipyards have different construction scales, operation scenarios and load standards, and a single model cannot be adapted to all working conditions. Combined with the shipyard projects at home and abroad, the following types of cranes are the mainstream choice for shipbuilding and offshore projects.

    Double Girder Gantry Crane

    Double girder gantry cranes are the most widely used models in shipyards, and the double girder structure significantly improves the equipment's load carrying capacity and structural stability.

    It is suitable for high-capacity heavy-duty lifting and large-span operation areas, and can meet the core processes such as hull segment closing and heavy steel structure transfer, and is suitable for the regular construction needs of most large and medium-sized shipyards.

    Shipbuilding Gantry Crane with Winch Trolley System

    These specialized shipbuilding gantry crane are equipped with customized winch and travelling trolley systems for stronger lifting traction and smoother operation.

    They are highly adaptable to the lifting of large hull blocks, long-distance transfer of super-heavy modules, and large-span dockyard operation scenarios, and are the core models for large shipyards and offshore engineering bases.

    Semi-portal Crane

    Part of the shipyard edge of the work area, semi-open construction sites, one side with plant walls or fixed support structures, without the need for bilateral outrigger layout.

    Semi-portal Crane can be built based on the existing building structure, reduce infrastructure investment, space adaptability is very strong, suitable for shipyard edge area, auxiliary construction area of lightweight heavy-duty operations.

    Rail-mounted Gantry Crane

    In large-scale standardized shipyards, the layout of the dock and operation area is regular, and the construction line is fixed. Cranes run along a fixed track, with precise alignment and stable running order.

    Long-term deviation of the equipment is small, low failure rate, suitable for high-frequency, process-oriented shipbuilding operations, suitable for large-scale mass-production shipyards.

    Customized Shipyard Gantry Crane

    For special offshore projects and large-scale ship construction projects, the standard model cannot meet the special needs of synchronous lifting, multiple lifting point operation, variable speed control, etc.

    Professional and reliable shipyard gantry crane suppliers can customize multi-hook layout, synchronous lifting system, variable speed control system and exclusive anti-corrosion solutions according to the working conditions, which can fully match the niche, heavy-duty and specialized shipbuilding construction scenarios.

    Procurement must confirm the core technical parameters one by one

    A lot of shipyard equipment adaptation problems stem from the procurement stage of parameter checking is not meticulous. The parameters of shipbuilding Crane is not a simple tonnage matching, but a combination of site, working conditions, the environment of the full range of adaptation, each parameter affects the use of equipment.

    Rated lifting capacity

    Equipment tonnage selection cannot only refer to the weight of conventional components, you need to account for the hull segments, the maximum deadweight of heavy equipment, while superimposed on the self-weight of the spreader and the operating dynamic load factor.

    We must reserve sufficient load-bearing safety margin to prevent the equipment from long-term full-load and overload operation, and avoid structural fatigue and safety hazards from the source.

    Equipment span

    The span directly determines the operating width of the equipment, which needs to accurately match the width of the dock, the layout of the assembly area and the spacing of the construction channel.

    If the span is too small, there will be a large number of blind zones, unable to cover the hull construction area; if the span is too large, it will cause a waste of equipment performance and affect the overall stability of the fuselage.

    Lifting height

    The lifting height should be determined by combining the hull construction height, large equipment installation position and site headroom size.

    It should be ensured that the heavy load can smoothly cross the construction obstacles after lifting, to meet the space requirements of high-level assembly and high-level equipment installation, and to avoid collision of lifting and restricted operation.

    Running length

    The running length determines the coverage of the Crane traveling along the track, which is directly related to the operational coverage of the whole shipyard and yard.

    It needs to be planned according to the overall construction line of the shipyard, component stacking area, and segment assembly points to ensure that there is no lifting dead space in the whole yard, and there is no need for manual secondary transfer.

    Working level

    The working level is the core index that distinguishes the equipment's ability to adapt to heavy loads. Shipyard operation is high-frequency, heavy-duty, and year-round continuous construction, which necessitates the selection of medium-heavy and heavy-duty working class equipment.

    Light and medium standard models are completely unable to adapt to shipbuilding conditions, and short-term use will result in structural wear and tear, aging of accessories, and frequent failures.

    Number of hooks and lifting points

    Conventional auxiliary work can use the main and auxiliary hooks to meet the needs of basic lifting. Large hull segments and shaped offshore modules require synchronized and coordinated lifting of multiple lifting points.

    When purchasing, it is necessary to determine the number of hooks and synchronization control mode according to the lifting process of the largest components, so as to ensure the even force and accurate alignment of lifting.

    Operation speed

    The speed ratio of hoisting, traveling of trolley and traveling of the whole machine needs to be adapted to the safety standard of shipbuilding construction. The high-precision assembly process is suitable for low-speed smooth operation, and the material transfer process can be appropriately accelerated.

    Reasonable speed matching cannot only guarantee the construction safety and assembly precision, but also match the overall construction rhythm.

    Outdoor environment protection configuration

    Coastal shipyards must focus on verifying the equipment's wind resistance level, anticorrosion coating process, electronic control of moisture and dust level.

    High-quality marine Crane will use multi-layer anticorrosion spraying, sealed electronic control box, high temperature and salt spray resistant cables, specially adapted to the seaside strong winds, high corrosion, high humidity and harsh environments.

    Power supply standard

    Manufacturers will match the motor and electronic control configuration according to the local power system to avoid mismatch in power supply, resulting in equipment failure to start, circuit burnout, abnormal operation and other problems.

    Inspection of a full set of compliant technical data

    Regular manufacturers can provide equipment assembly drawings, technical parameter lists, structural stress calculations, wheel load data, electrical schematics, a full set of parts lists and factory inspection reports, which can meet the global project acceptance standards.

    Confirmation of core parts brand and configuration

    The operational stability and service life of Crane depends entirely on the quality of core accessories. Focus on verifying the brand and configuration standard of motor, reducer, brake, electronic control system, wire rope, hook, traveling wheel, control system.

    reliable gantry crane supplier for shipyards
    reliable gantry crane supplier for shipyards

    Shipyard procurement of gantry cranes common misconceptions

    Most of the late failure of equipment, poor adaptability, schedule delays, all stem from the procurement phase of the decision-making omissions. These common misconceptions may seem subtle, but will affect the use of equipment for more than ten years.

    The most common procurement problem is to screen suppliers based on price alone. Shipbuilding special equipment, materials, processes, protection, quality control costs are fixed, low prices will inevitably be accompanied by configuration shrinkage, cannot be adapted to shipyards heavy corrosive conditions.

    Copying the general model parameters, not combined with the shipyard construction line, dock layout customization and transformation, will lead to more blind spots in the operation of the equipment, operational interference, poor adaptability, and cannot be adapted to the actual production process.

    Neglecting the coastal strong wind, salt spray corrosion, high humidity and other environmental factors, omitting the special anticorrosion, wind, moisture-proof configuration, the equipment will quickly rust and aging, the frequency of failures increases year by year.

    Neglect the process requirements of synchronized lifting, the choice of ordinary single-point lifting equipment, lifting of large components is prone to uneven stress, offset deformation, there is a great construction risk.

    Do not verify the manufacturers of shipyard project cases, gullible general lifting equipment can be adapted to shipbuilding conditions, resulting in equipment cannot meet the heavy-duty, large-span, high-precision construction needs.

    Not clear the scope of the offer, the late appearance of transportation, installation, commissioning, information, accessories and other invisible charges, the overall procurement costs far exceeded expectations.

    Fuzzy installation, commissioning, after-sales rights and responsibilities, equipment failure after multiple shirking, unable to repair in time, resulting in delays in the work schedule.

    The site dimensions, working load, environmental conditions provided at the inquiry stage are incomplete, and the manufacturer's customized program is inconsistent with the site, requiring repeated rectification and rework.

    Frequently Asked Questions

    What is the difference between ordinary gantry cranes and shipbuilding gantry cranes?

    Ordinary gantry cranes are suitable for inland general factories, with mild working conditions, stable load and no strong corrosion risk. Shipbuilding gantry cranes are specially designed for shipyards with large spans, heavy loads, coastal corrosion, multi-point simultaneous lifting and other special working conditions, with higher structural strength, stronger protection level and better control accuracy, so the two can't be used in place of each other.

    What scenarios in shipyards are suitable for the selection of double girder gantry cranes?

    Large and medium-sized shipyards are suitable for double girder gantry cranes for the closing of hull segments, transfer of heavy steel structures, and normalized heavy-duty operations in shipyards. Its carrying capacity and stability can meet the high-frequency, high-capacity, large-span shipbuilding core processes.

    Why is synchronized lifting vital in shipbuilding projects?

    The center of gravity of large hull segments and offshore modules is scattered and the structure is fragile. Single-point force or uneven lifting speed will cause distortion, cracking, and alignment deviation of the components. Synchronized lifting can ensure that the force at each lifting point is uniform, lifting and lowering are synchronized to protect the integrity of the components and safeguard the construction accuracy.

    Procurement of shipbuilding gantry cranes, in addition to price, but also focus on what to verify?

    Focus on verifying the working level of the equipment, anticorrosion protection configuration, core parts brand, structural welding process, factory quality inspection reports, manufacturers of shipyard project cases, the integrity of the technical data, installation and commissioning services and long-term after-sales service.

    What technical information do I need to request from the manufacturer before placing an order?

    Manufacturers can be asked to provide equipment assembly drawings, detailed technical parameter tables, structural stress calculations, wheel pressure load data, electrical schematic diagrams, parts list, factory quality inspection reports and English operation manuals to meet the needs of global project acceptance and operation and maintenance.

    How important is after-sales service to shipyard gantry cranes?

    Shipyard lifting equipment is the core equipment of the production line, once the shutdown will lead to the stagnation of the entire ship construction process, resulting in a huge loss of time. Perfect after-sales response, spare parts supply, troubleshooting service is the key to ensure the continued construction of the project.

    Can a supplier provide a full scene of shipbuilding and ship repair Crane program?

    Professional entities can provide one-stop construction, maintenance, offshore prefabrication of a full range of gantry cranes, according to the construction of heavy-duty working conditions, maintenance of flexible working conditions to match the different models and configurations, unified equipment quality and after-sales system, to match the full range of scenarios in the shipyard operational needs.

    Summarize

    The core of selecting a reliable supplier of shipbuilding gantry cranes is not to find the lowest price, but to find a partner that is suitable for their own shipyard conditions, construction techniques and long-term development. The specificity of shipbuilding determines that the suitability, stability and service ability of lifting equipment is far more important than the price of a single purchase.

    From model selection, parameter checking, manufacturer strength verification, to installation and commissioning, warranty and operation and maintenance, each link has a direct impact on the service life of the equipment and project construction efficiency.

    Henan Mine Crane, as a professional manufacturer of shipbuilding gantry cranes, is deeply engaged in global shipyards and offshore engineering lifting support field, with a wealth of overseas project landing experience. We can customize exclusive gantry crane solutions for different shipyard conditions and offshore engineering scenarios, and provide a full set of technical data, on-site installation guidance and lifelong operation and maintenance services.

    If your shipyard or offshore project needs to match the exclusive lifting equipment, you can provide the equipment lifting capacity, span, lifting height, running length, dock layout and site conditions, our engineering team will customize the optimal solution for you.

    Discuss the crane arrangement for your project.

    Shipyard proposals need more definition than a maximum capacity. State the required load handling, hook positions and trolley coordination, then compare the documents and responsibilities included in each offer. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Shipbuilding Gantry Crane

    View product parameters
    Lifting capacity: 100 t, 200 t, 250 t, 450 tSpan: 40 – 97 mLifting height: 35 – 70 m

    Lift ship blocks and large assemblies with a shipbuilding gantry configured for the dock and production layout. Define lifting points, trolley functions and any block-turning sequence before selection.

    Updated 2026 · Henan Mine Crane

  • Ship-to-Shore Crane Cycle Planning: Reach, Positioning and Handover

    Ship-to-Shore Crane Cycle Planning: Reach, Positioning and Handover

    Technical guide

    Ship-to-Shore Crane Cycle Planning: Reach, Positioning and Handover

    Terminal performance depends on the complete container cycle rather than one motion speed. Review vessel access, positioning, transfer points and operating arrangements together when assessing an STS project.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    ship-to-shore cranes
    ship-to-shore cranes
    Project planning notes

    Key points for this crane project.

    1. How Ship to Shore Cranes are Revolutionising Port
    2. Why Ship-to-Shore Cranes Are Transforming Modern
    3. How Ship-to-Shore Cranes Improve Container Handling
    Read the technical guide

    How Ship to Shore Cranes are Revolutionising Port Operations Around the World

    The continuous expansion of global trade and the accelerated large-scale container ships have made efficient, intelligent and stable loading and unloading capabilities the core competitive barriers for ports. The new generation of Ship-to-shore Crane subverts the traditional port stagnation, inefficiency, and congestion operation shortcomings. Relying on large-load performance, fast loading and unloading technology, intelligent sway control, and automatic control technology, it effectively improves the ship turnover speed and the overall throughput of the terminal, comprehensively optimizes the operation process of the port area, helps modern smart ports accurately adapt to the berthing needs of large ships, and continuously improves the efficiency of cross-border logistics operations.

    Why Ship-to-Shore Cranes Are Transforming Modern Port Operations

    The core competitiveness of modern ports has long been transformed from a simple number of berths and site scale to comprehensive capabilities such as ship turnover speed, container throughput efficiency, and operational stability. The traditional old port loading and unloading cranes have a limited operating radius, slow loading and unloading speed, and a single adapted ship type, which is completely unable to match the current pace of development of the global shipping industry. Relying on the core advantages of customization, high performance and high adaptability, modern ship and shore port cranes accurately crack the pain points of modern port operations, become the core driving force for the digitization and large-scale transformation of smart ports, and enable high-quality port operations in all directions.

    Larger vessels

    At present, ocean-going shipping has fully entered the era of large-scale ships, and 24,000 TEU ultra-large container ships have become the main force of shipping. Their wide decks and high-rise container stacking requirements make it difficult for traditional small port shore bridges to adapt, which can easily cause problems such as large ships being stuck in port and low berth utilization. Henan Mine Crane manufactured self-developed new-generation large-scale ship-to-Shore Crane has undergone special structural upgrades. It has a large extension distance, ultra-high lifting height and large rated load. It can realize the loading and unloading of large ships without dead ends in all compartments, and is perfectly adapted to the operation of ultra-large container ships.

    Faster turnaround

    Ship turnover efficiency is the core competitiveness of the port. The traditional old STS shore bridge has slow start and stop, poor alignment accuracy, and high failure rate, which can easily cause ships to stay in port for a long time and drive up shipping logistics costs. Our modern and intelligent ship-to-Shore Crane is equipped with an optimized transmission structure and an intelligent control system, which runs smoothly, has fast loading and unloading speed, accurate alignment, and supports 24-hour uninterrupted and stable operation. Multi-equipment collaborative operation can greatly compress the length of single-ship operation, effectively avoid manual errors and equipment downtime problems, and significantly improve the berth turnover rate and the overall logistics timeliness of the port.

    Higher throughput

    As the global container trade volume continues to rise and the frequency of shipping continues to increase, the operating efficiency of traditional port lifting equipment is short, which seriously restricts the increase in port throughput, resulting in idle waste of terminal berths and site resources. Our new generation of efficient Ship-to-Shore Crane has been fully upgraded in performance, relying on faster loading and unloading speed, wider operation coverage and stable continuous operation capabilities, and with a smart port intelligent dispatching system, it can fully tap the potential of berth operations. Practical cases of landing in multiple smart ports have proved that the annual throughput of the terminal can be significantly increased after upgrading the equipment, helping the port to break through the upper limit of capacity.

    How Ship-to-Shore Cranes Improve Container Handling Efficiency

    Container loading and unloading is the core link of port operations, and the efficiency of loading and unloading directly determines the overall operation level of the port and the customer experience. Traditional container loading and unloading operations have cumbersome processes, slow alignment, site congestion, and high loss rates, which not only slow down the pace of operations, but also increase port operation and maintenance and logistics costs. Through the optimization of mechanical structure, simplification of operating processes, and the empowerment of intelligent technology, the new generation of automated ship-to-Shore Crane upgrades the efficiency of port container handling in all directions from the three dimensions of loading and unloading speed, operating range, and site circulation, and realizes refined and efficient operation of port operations.

    Faster loading cycles

    The traditional manual operation of the shore bridge relies on manual operation, the movement connection is blunt, the alignment is repeatedly adjusted, the loading and unloading cycle takes a long time and the stability is poor, which seriously drags down the rhythm of port operations. Our newly upgraded high-speed ship-to-Shore Crane is equipped with an intelligent frequency conversion control system and a dual-car collaborative structure to realize multi-action synchronous linkage, and cooperate with the precise positioning assistance system to automatically complete the alignment, lock the box and drop the box operations, greatly compressing the invalid operation time. The overall loading and unloading efficiency of the equipment has been greatly improved, the operation has been smoother and more stable, and the whole process of loading and unloading of containers in the port has been effectively accelerated, helping the port to significantly increase the volume of single-hour operations.

    Reduced congestion

    The unstable rhythm of port loading and unloading, container accumulation, and congestion of transportation vehicles are the core pain points that restrict the efficiency of terminal circulation. Traditional inefficient port lifting shore bridges can easily cause a vicious circle of operations. Henan Mine Crane manufactured modern and intelligent dispatching Ship-to-Shore Crane has a stable and efficient loading and unloading rhythm, which can realize the instant unloading and transfer of containers, and the instant loading and leaving, so as to prevent the accumulation and retention of goods from the source. The equipment can be seamlessly connected to the smart port dispatching system, intelligently match the yard inventory and vehicle movement lines, rationally allocate operating resources, avoid vehicles getting together and waiting, effectively dredge the terminal operation link, greatly reduce the probability of congestion in the port area, and make the port logistics flow more efficient and smooth.

    How Automation Is Changing Ship-to-Shore Crane Operations

    With the rise of the global wave of smart port construction, automation and intelligent technology have become the core directions of the iterative upgrading of the port Ship-to-Shore Crane. The traditional manual operation mode has many shortcomings such as high labor intensity, high labor costs, large operating errors, and restricted operations in bad weather. The full implementation of automation technology has completely reconstructed the operation mode of the port shore bridge, realizing the transformation of port loading and unloading operations from manual leadership to intelligent autonomy, greatly improving operation safety, stability and efficiency.

    Remote operation

    The traditional high-altitude manual operation mode of port lifting machinery has a difficult environment and high labor intensity. It not only has great safety risks, but it is also vulnerable to severe weather such as heavy rains and strong winds, and cannot guarantee all-weather operations. Our remote control ship-to-Shore Crane is equipped with high-definition transmission and high-precision remote sensing system, which supports remote automatic control of the ground central control room, with clear pictures and accurate alignment throughout the process. The new operating mode completely avoids the risk of high-altitude operations, is not limited by extreme weather, can achieve 24-hour uninterrupted operation, and can also realize single-person multi-machine control, greatly reducing the labor operation cost of the port.

    Anti-sway technology

    Container shaking is a common problem in the operation of traditional port shore bridge equipment. It can easily slow down the progress of the operation and damage the cargo equipment. The stability of the operation depends entirely on the experience of the driver and cannot be standardized and controlled. Our new-generation Ship-to-Shore Crane, equipped with intelligent sway control technology, can monitor container swing data in real time through high-precision sensors, and dynamically adjust equipment operating parameters relying on intelligent algorithms to quickly offset swing inertia. The technology adapts to various types of wind and operating scenarios without manual intervention, greatly shortens the time to stabilize the box, improves the alignment accuracy, effectively reduces the operation error rate and equipment loss, and significantly improves the safety of port loading and unloading and operating efficiency.

    Smart monitoring

    The traditional old-fashioned shore bridge relies on manual inspection and post-mortem maintenance. The investigation of hidden dangers is not timely, and frequent equipment failures can easily cause the terminal to shut down and operations to be interrupted. We configure a full set of intelligent monitoring systems for intelligent monitoring ship-to-Shore Crane, equipped with multiple types of high-precision sensors, and continuously collect data on equipment operation, mechanical loss and working conditions 24 hours a day. The system predicts potential failures through intelligent analysis of big data, gives early warning and guides accurate maintenance, completely changes the passive operation and maintenance mode, effectively reduces the equipment failure rate, extends the service life of the equipment, and guarantees the continuous and stable operation of port loading and unloading operations in all directions.

    How Ship-to-Shore Cranes Support Global Trade Growth

    The continuous growth of global trade is inseparable from the efficient support of port logistics. With the continuous expansion of cross-border e-commerce, ocean-going trade, and global supply chain layout, global container traffic has maintained a steady growth trend all year round. As the core loading and unloading equipment of the port, the intelligent Ship-to-Shore Crane's performance upgrades and technological iterations directly match the large-scale and efficient development needs of global trade, and it has become an important hardware support for driving global trade circulation and stabilizing the supply chain system.

    Growing container volumes

    The volume of global container trade has skyrocketed year by year, and the demand for all kinds of cross-border cargo transportation has continued to rise, putting forward higher requirements for the ability of ports to load and unload quickly and efficiently. It is difficult for traditional old port lifting equipment to withstand peak operating pressure. Our modern high-throughput ship-to-Shore Crane has high-intensity, continuous operation capabilities, stable operation and high throughput efficiency. It can calmly cope with the large workload during the peak trade season and effectively avoid problems such as cargo backlogs and route delays. With reliable operating performance, it adapts to the incremental needs of global container trade in all directions, and provides solid equipment support for the efficient logistics and circulation of ports.

    Larger container ships

    The shipping industry has fully entered the era of large-scale ships, and 20,000 TEU-class super-large ships have become the main force of ocean-going transportation, but the old and small port shore bridge equipment cannot be adapted to its operating needs, resulting in most small and medium-sized ports unable to undertake ocean-going main routes. Henan Mine Crane manufactured high-end customized Ship-to-Shore Crane we developed has large loads, ultra-wide extensibility and high stacking capabilities, which can be perfectly adapted to all kinds of ultra-large container ship loading and unloading operations. Help ports open more ocean-going routes, increase the volume of cargo per voyage, reduce overall logistics costs, and effectively promote the large-scale and intensive development of regional and global trade.

    Higher terminal capacity

    Most traditional ports have sufficient berths and yard resources, but they are limited by the performance of old equipment, there is a significant upper limit on terminal throughput capacity, and the resource utilization rate is extremely low. Our new generation of large-scale intelligent ship-to-Shore Crane relies on the core advantages of efficient loading and unloading, intelligent control and stable operation to fully tap the idle potential of terminal berths and yards, and greatly increase the operating capacity per unit time and area. The upgrading of port shore bridge equipment can comprehensively improve the terminal's freight undertaking capacity and cargo distribution efficiency, strengthen the port's trade radiation capacity, and provide core hardware support for global trade expansion and cross-border supply chain stability.

    Key Challenges When Upgrading Ship-to-Shore Cranes

    The upgrading and transformation of ship-to-shore Crane is the core measure of the intelligent and efficient transformation of the port, which can enhance the competitiveness of port operations in all directions, but in the process of actual upgrading and landing, port enterprises generally face multiple practical problems. Issues such as terminal infrastructure adaptation, port shore bridge parameter customization, construction and installation planning, etc. directly affect the upgrade cost, construction cycle and landing effect, and need to be combined with the actual working conditions of the terminal for scientific planning and precise landing.

    Terminal infrastructure

    Henan Mine Crane manufactured modern large-scale intelligent ship-to-Shore Crane has been greatly upgraded in weight, load and size, and has strict requirements for infrastructure standards such as dock foundation, track, power supply and communication. Most old port infrastructure is built according to small traditional equipment, with insufficient carrying capacity and aging supporting facilities, which cannot be adapted to the operating needs of new equipment. Direct replacement of equipment can easily cause safety failures, and large-scale refurbishment will drive up costs and shut down work. We can combine the original infrastructure data and equipment parameters of the terminal to customize a lightweight adaptation and transformation plan, taking into account the operation safety, transformation cost and construction efficiency of the shore bridge equipment.

    Crane specifications

    The customization of ship-to-shore Crane parameters is the core key of port upgrading. The berthing conditions, ship type structure, and operating volume of different terminals vary greatly, and there is no universal adaptation to port shore bridge equipment. Too small parameter selection will cause efficiency bottlenecks, and too large selection will cause excess performance and waste of resources. At the same time, it is necessary to take into account the compatibility of the equipment with the terminal dispatching system. Relying on our rich experience in port machinery manufacturing, we can accurately customize parameters such as lifting height, extension distance, and intelligent configuration according to the short-term operating needs of the port and long-term expansion planning to avoid upgrade risks and ensure maximum equipment benefits.

    Installation planning

    Ship-to-Shore Crane is a super-large port machinery equipment. The installation process is cumbersome and the technical threshold is high. The port cannot stop construction for a long time, which brings great challenges to equipment upgrading. The demolition of old equipment, the hoisting and wiring of new equipment, intelligent debugging, and safety calibration require rigorous process planning and professional technical teams. Efficiency increase.

    The Future of Ship-to-Shore Cranes in Smart Ports

    The construction process of global smart ports continues to accelerate, and greening, intelligence, efficiency and energy saving have become the core trends in the development of port equipment. As the core loading and unloading equipment of the port, the technological iteration of the intelligent Ship-to-Shore Crane has never stopped. In the future, it will continue to upgrade in the three directions of deep automation, low-carbon energy-saving, and modular customization, fully adapting to the future unmanned, green, and high-capacity operation needs of smart ports, and continue to lead the innovation of the global port format.

    Advanced automation

    Smart ports are iterating towards completely unmanned operations, and traditional semi-automated port shore bridges still require manual intervention, which is difficult to adapt to the future development needs of high-end terminals. In the future, automated Ship-to-Shore Crane will deeply integrate 5G, artificial intelligence, machine vision and digital twin technologies to realize unmanned and autonomous operation of the whole process of loading and unloading operations. The equipment can automatically complete ship alignment, container identification, precise operations and exception handling, and can also be linked and coordinated with various smart devices in the terminal, cooperate with AI independent learning to continuously optimize the operation logic, adapt to complex working conditions in all directions, and create an efficient and intelligent unmanned terminal operation system.

    Energy efficiency

    Under the dual-carbon policy, green energy conservation has become the core standard for the construction of smart ports. The high energy consumption and large carbon emissions of traditional old-fashioned ship and shore bridges are not in line with the development trend of the industry. In the future, the new energy-saving ship-to-Shore Crane will focus on low-carbon energy-saving design, equipped with a frequency conversion energy-saving control system and an energy recovery device, which can recycle redundant energy during operation and significantly reduce energy consumption and carbon emissions. At the same time, it is equipped with a lightweight structure, low-loss accessories and a silent system to achieve low-energy, low-noise and zero-pollution operations, helping the port to build a green and low-carbon operation model and reduce long-term operation and maintenance costs.

    Future-ready designs

    Port shipping technology and market demand continue to iterate, and the traditional fixed port shore bridge function is difficult to cure and upgrade, and it is easy to be quickly eliminated by the industry. In the future, the new generation of modular ship-to-Shore Crane adopts a forward-looking modular design, and the high-strength lightweight steel structure is adapted to various terminal infrastructure scenarios. At the same time, an intelligent upgrade interface is reserved, which can flexibly expand functions and update the system according to the needs of port development, without the need to replace equipment as a whole. Standardized general-purpose accessories greatly simplify late-stage operation and maintenance, effectively reduce the cost of the whole life cycle of equipment, and adapt to the development needs of long-term iterative upgrading of smart ports.

    Henan Mine Crane

    Ship-to-Shore Crane is the core equipment for the upgrade and iteration of modern smart ports. It has effectively solved various operational problems such as inefficient traditional port operations, congestion, and poor adaptability. With the outstanding advantages of intelligent automation, energy saving and high efficiency, and adaptation to large ships, it comprehensively empowers the development of global ports and cross-border trade. As a professional port crane manufacturer, Henan Mine Crane Factory is deeply engaged in ship-to-shore crane research and development customization, which can solve the upgrading problems of terminal infrastructure adaptation, installation and commissioning, parameter selection, etc. in a targeted manner, and provide high-adaptability and long-life high-quality port shore bridge equipment to help major ports reduce costs and increase efficiency, and embrace the future development trend of intelligence and greening.

    Discuss the crane arrangement for your project.

    Terminal performance depends on the complete container cycle rather than one motion speed. Review vessel access, positioning, transfer points and operating arrangements together when assessing an STS project. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Ship-To-Shore Crane (STS)

    View product parameters
    Lifting capacity: 40-65 80-120 tBoom outreach: 40-72 mWorking class: A8

    Transfer containers between ship and quay with an STS crane selected for the berth and vessel envelope. Define the lifting-appliance arrangement, outreach, rail position and handling cycle.

    Container Overhead Crane

    View product parameters
    Lifting capacity: 30-65 tSpan: 18-35 mLifting height: 8 – 20 m

    Transfer containers within a defined overhead runway area using a double-girder bridge and matched spreader. Container size, working clearance and the handling sequence determine the arrangement.

    Updated 2026 · Henan Mine Crane

  • STS Crane Outreach and Height: Drawings Needed for Procurement

    STS Crane Outreach and Height: Drawings Needed for Procurement

    Technical guide

    STS Crane Outreach and Height: Drawings Needed for Procurement

    The vessel envelope provides the reference for outreach and working height. Share ship information, quay geometry and required transfer positions so the proposed crane can be checked against the intended service.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    STS Crane Outreach and Height: Drawings Needed for Procurement
    Henan Mine Crane lifting equipment
    Project planning notes

    Key points for this crane project.

    1. What Is a Ship-to-Shore Crane
    2. Main Components of an STS Crane
    3. Key Ship-to-Shore Crane Specifications to Evaluate
    Read the technical guide

    What Is a Ship-to-Shore Crane

    Ship-to-Shore Crane is a large-scale gantry crane with a leading-edge rail type at the terminal. The whole machine walks along a track parallel to the shoreline of the terminal, relying on a pitchable front girder, a trolley running laterally, a lifting system and a container spreader to complete the two-way loading and unloading of containers on the shore. It is the only port core equipment suitable for berthing operations of large container ships.

    Unlike yard lifting equipment, STS shore bridges are designed for high-altitude, long-span, and heavy-duty continuous operation on the side of the ship. They have large outstretched distances, ultra-high lifting heights, and precise positioning capabilities. They can be adapted to the needs of all types of ship operations from feeder ships and Panama-type ships to ultra-large container ships (ULCV).

    Principle of collaborative working of core institutions

    The efficient operation of Ship-to-Shore Crane relies on the precise coordination of the four core institutions to form a standardized and closed-loop container transshipment system:

    1. The cart travel mechanism drives the whole machine to travel smoothly along the dock track, accurately calibrates the position and aligns the ship's container space, and completes the preliminary positioning of the whole machine.;
    2. The trolley drive system is equipped with a lifting mechanism and a special spreader, which slides smoothly laterally along the main girder to achieve high-precision horizontal positioning of the container.;
    3. The lifting mechanism relies on the wire rope transmission system to lift smoothly and complete the precise take-off and landing operations in the vertical direction of the container.;
    4. The container spreader locks the box body through a four-corner automatic rotary locking mechanism, which effectively guarantees the operating stability and safety under heavy-duty conditions.

    At the same time, the beam pitch system can adjust the angle according to the height of the ship and the changes in tides, adapt to ships with different draft depths and stacking heights, and adapt to complex terminal operation scenarios throughout the process.

    Main Components of an STS Crane

    Ship-to-Shore Crane is a large-scale integrated lifting equipment. The structure of the whole machine, mechanical transmission, electronic control system, and safety protection system are highly coupled. The core components cover nine modules, which directly determine the stability and service life of the equipment.

    Door frame structure and legs

    As the load-bearing main body of the whole machine, the main girder of the gantry and the sea and land side outriggers are welded with high-strength steel structure to carry the weight of the whole machine and heavy-duty operating loads.

    The dual-track support structure on the land and sea side guarantees the lateral stability of the equipment, and the outriggers reserve sufficient clearance for passage, which can meet the barrier-free passage of terminal card collection, AGV, and stacking equipment, and adapt to the intensive operation scenarios at the forefront of the terminal.

    Girder and pitch system

    The girder is divided into a front extension arm and a rear tie rod structure. The front girder is the core span structure covering the operation of the ship. It can be lifted and put away through the pitch system to meet the storage needs of the ship's departure and windy weather equipment. The pitch hydraulic/mechanical system has stable speed regulation and overload protection functions, which can be adapted to different ship heights to avoid the risk of hull collision.

    Trolley and trolley drive system

    The trolley is equipped with a lifting mechanism, a spreader and a driving device to move horizontally at high speed along the girder track, which is the core component of the horizontal transfer of containers. Using frequency conversion drive technology, it has the characteristics of stable start and stop and accurate positioning, which can effectively reduce load shaking and shorten the operating cycle time. Unlike ordinary cranes, the power transmission system of Ship-to-Shore Crane is mostly arranged in the machinery room instead of the trolley body, which reduces the weight of the trolley and improves operating efficiency.

    Lifting mechanism

    The lifting mechanism is the core power unit of the STS shore bridge, which consists of a drive motor, a reducer, a reel, a wire rope, and a pulley block, and is responsible for the vertical lifting of containers. Equipped with an electromagnetic +mechanical dual braking system, it has overload self-locking and emergency braking functions to eliminate the risk of load slipping. It can be adapted to single-box, double-box, and multi-box operations in series to meet the operating needs of different throughput terminals.

    Special spreader for containers

    Mainstream STS spreaders are divided into telescopic single box spreaders, double 20-foot double box spreaders, and 40/45-foot series spreaders, which are suitable for standard ISO container specifications.

    The spreader is equipped with four-corner automatic rotary locks, anti-false locking sensors, and tilt correction devices, which can be automatically adapted to container misalignment and tilt scenes without manual assistance, greatly improving operation safety and efficiency. The special spreader for refrigerated containers can also be adapted to the needs of cold chain container operations.

    Electrical and control system

    The core adopts PLC programmable control system + distributed bus technology, with optical fiber communication system, strong anti-interference ability and high operating stability. The whole machine is equipped with a frequency conversion drive system (VFD) to realize stepless speed regulation of each mechanism, and at the same time it is equipped with an energy feedback device to reduce energy consumption. Transformers, control cabinets, and drive modules are centrally arranged in the computer room to facilitate operation, maintenance, and overhaul.

    Operating cab

    The cab is arranged in the optimal observation position under the gantry, and the field of view covers the deck of the ship and the working area of the dock. The automated model can be equipped with a remote control system, without on-site duty, and the operation can be completed only through the remote console, which is suitable for the construction needs of unmanned intelligent terminals.

    Orbital walking mechanism

    The whole machine walks along the preset track of the pier, and the four corners are equipped with balanced travel trolleys. The load is evenly distributed by hinged balanced beams to avoid local force overload. The trolley adopts a combination design of driving wheel + driven wheel, which can walk smoothly and accurately locate, which can meet the needs of long-distance and high-frequency alignment travel.

    Key Ship-to-Shore Crane Specifications to Evaluate

    Ship-to-Shore Crane is a long-term heavy-asset equipment with a service life of up to 25-30 years. The selection of core parameters needs to take into account the current operating needs and the future trend of large-scale ships. The five core parameters directly determine the adaptability of the equipment and the operating capacity.

    Rated lifting load

    The rated lifting load refers to the effective safety load (SWL) under the spreader. It is necessary to distinguish between the total gross load of the whole machine and the Net payload.

    The selection needs to be combined with the mainstream container specifications of the terminal, the branch terminal focuses on the load of a single box, and the hub port needs to give priority to adapting to double-box and series operations to increase the hourly operation volume. At the same time, it is necessary to match the actual weight of the stacker to avoid cost waste caused by insufficient load redundancy or excessive redundancy.

    The number of job columns and the span of the whole machine

    The span of the whole machine refers to the spacing between the center lines of the sea and land side tracks. Some large terminals use a 35-meter widened gauge, which can be adapted to more traffic lanes and AGV operating paths.

    The number of operating columns of ship containers is determined by the outer extension distance, not the span. With the iteration of large-scale ships, the number of container columns for ultra-large ships has reached more than 24 columns. The selection needs to match the maximum number of columns of the ship, and at the same time combine the layout of the terminal shoreline and the spacing of berths to avoid blind spots in equipment operations.

    Lifting height and lowering depth

    The vertical operating parameters of the Ship-to-Shore Crane are divided into two core indicators, which directly determine the ship's adaptability.:

    The selection of the type requires additional consideration of the tidal gap of the terminal. The port area with large tidal changes needs to reserve a height margin to avoid the impact of high and low water levels on the operation. At the same time, it is necessary to predict the future needs of large-scale ship upgrades in advance and reserve redundant parameters.

    Mechanism operating speed (core production capacity)

    The operating speed of the equipment directly determines the amount of work per hour (MPH). It is necessary to distinguish between the no-load speed and the full-load speed.

    The speed parameters directly affect the operation cycle time, and reasonable speed matching can greatly increase the hourly operation volume of the stand-alone machine, reduce the waiting time for the ship to dock, and improve the overall throughput efficiency of the terminal.

    Track gauge and overall dimensions of the whole machine

    The track gauge determines the compatibility of the equipment with the terminal infrastructure. The standard 30.48-meter track gauge is suitable for most mature terminals. The existing track elevation, track gauge, and basic carrying capacity need to be strictly checked for the transformation of the terminal to avoid the equipment from being unable to land.

    The selection needs to strictly match the existing infrastructure parameters of the terminal to prevent transformation and rework.

    STS Crane Outreach: How Much Outreach Do You Need

    The extension distance is the most critical selection index of the STS shore bridge, which directly determines the tonnage and width of the ship that the equipment can be adapted to, and determines the ship access capacity of the terminal in the next 20 years.

    Three core definitions of extension distance

    Water-side outer extension distance: the maximum operating horizontal distance from the centerline of the water-side track to the front end of the girder, the core is suitable for ship operations; land-side rear extension distance: the extension distance from the centerline of the land-side track to the yard side determines the coverage of terminal stacking and transshipment operations; total operating range: the horizontal operation coverage range of the whole machine is the core basis for the full coverage of equipment operations.

    Extension distance and ship type adaptation standard

    The width of the ship and the number of container columns continue to increase with the upgrade of the ship type, and the selection of the outer extension distance must match the ship type grade:

    Extension distance levelSuitable for ship type
    Short extension modelOffshore feeder ships, small cargo ships
    Medium and long-distance modelsPanama-type ship, regional trunk ship
    Long extension modelSuper Panama ship
    Large extension model10,000-box super-large container ship (ULCV)

    Accurate extension distance calculation method

    It is strictly forbidden to apply common parameters to the extension distance. It must be calculated in combination with the real-world engineering of the terminal. The core steps:

    1. Figure out the hull width of the largest berthing ship in the port area, and accurately locate the limit position of the outermost container column of the ship;
    2. Superimposed calculation of on-site working condition parameters such as the compression margin of the ship's fender, the standard distance from the leading edge of the dock to the centerline of the track, etc.;
    3. Combined with the trend of large-scale iteration of ships in the industry, equipment parameters are reasonably reserved for redundancy to ensure long-term use value;

    Productivity Specifications: Designing for Container Moves per Hour

    Difference between total production capacity and net production capacity

    At present, the average effective production capacity of a single terminal in the world is 26 boxes/hour, and the high-end automated terminal can reach 35-40 boxes/hour.

    Core factors affecting the job cycle

    The cycle of single-box operation is restricted by multiple factors such as working conditions and equipment configuration, and can be divided into two categories: objective working conditions and equipment technical configuration. The core influencing elements are as follows:

    Objective working conditions

    Such factors are the inherent external conditions of terminal operations, which directly determine the time-consuming of basic operations, and are the core constraints of the cycle. It mainly includes the operating height difference, the travel distance of the trolley, the frequency of frequent alignment of the trolley, the weight of the container and the ship's stowage plan.

    The greater the height difference of the operation, the wider the travel span of the trolley, the more frequent the repeated alignment of the cart, and the longer the time it takes for the transfer of a single box; the larger the weight of the container, the more obvious the speed limit of the mechanism; unreasonable ship stowage scheme will increase the difficulty of alignment and retrieval of the box, further lengthening the operation cycle time.

    Equipment technical configuration

    The technical configuration of equipment is the core upgradeable element for optimizing operating efficiency and compressing the cycle, which mainly covers the three dimensions of operating mode, sway control system accuracy and automation level.

    The dual-box and series multi-box operation modes can break through the bottleneck of single-box efficiency, significantly increase the hourly operation volume, and adapt to high-throughput hub terminals; high-end automated configuration can reduce manual intervention, avoid operating errors, effectively stabilize the operation beat, and improve operation efficiency.

    Matching production capacity with terminal throughput

    The capacity of the Ship-to-Shore Crane must match the RTG/RMG equipment and AGV/collection card transfer capacity of the yard. If the capacity of the shore bridge is too high and the transfer of the yard lags behind, it will cause congestion at the forefront of the terminal; on the contrary, it will waste the ship's berthing window period. Large hub ports need to be equipped with high-efficiency models of 25-40 boxes/hour, and small and medium-sized branch terminals can be adapted to standard models of 20-25 boxes/hour to achieve full-link production capacity balance.

    Electrical, Automation & Control Requirements

    Power supply and electrification configuration

    The mainstream of large-scale STS shore bridges adopts 6kV/10kV high-voltage power supply, and the power supply methods are divided into cable reel type and sliding contact line type. The cable reel is suitable for the transformation of old docks and is easy to install; the sliding contact line operation and maintenance cost is lower, the power supply stability is stronger, and it is suitable for the newly built automated docks.

    Automation and remote work functions

    The modern Ship-to-Shore Crane automation system includes four core functions: automatic trolley alignment, intelligent sway control control, automatic container positioning, and remote unmanned control. Among them, intelligent sway control is divided into feedforward and feedback dual control.

    It can accurately suppress the shaking of the load, greatly improving the alignment accuracy and operating efficiency. The equipment can be seamlessly connected to the terminal TOS system to realize automatic reception, execution, and data return of operation instructions, and the positioning accuracy can reach ±15mm.

    Digital integration of smart ports

    The high-end models are equipped with a condition monitoring system (CMS) and an equipment operation and maintenance management system (CMMS), which can monitor equipment operating parameters, fault early warning, and remote diagnosis in real time to achieve predictive maintenance and reduce unplanned downtime.

    Access the port smart platform through data networking, complete the real-time synchronization of operation data, energy consumption data, and equipment status data, and adapt to the digital construction needs of smart ports.

    Safety and Environmental Requirements

    Wind load and meteorological adaptation design

    The equipment is equipped with automatic locking in high winds, track clamping, and storm anchoring devices. The whole machine can be quickly fixed in windy weather to prevent slippage and overturning. At the same time, for the marine salt spray environment, heavy anticorrosive coating and IP68 waterproof electrical accessories are used to resist seawater corrosion and extend the service life of the equipment.

    Energy-saving and environmentally friendly design

    Fully frequency conversion drive and regenerative energy feedback technology can greatly reduce energy consumption and equipment mechanical loss. The pure electric operation mode realizes zero emissions from operations, and the low-noise drive structure meets the environmental protection and noise reduction standards of the port area, and adapts to the increasingly stringent environmental protection control requirements of global ports.

    Ship-to-Shore Crane Procurement Checklist

    • Verification of basic information about terminal berths: verify the length of the coastline, the spacing of available berths, the track gauge and parameters, the compatibility of existing equipment interfaces, the carrying capacity of the terminal foundation, the power supply voltage and capacity, the perennial wind speed of the port area, the salt spray corrosion level, the tidal gap and other basic parameters to ensure that the equipment is fully adapted to the terminal infrastructure.
    • Verification of ship adaptation parameters: confirm the maximum berthing width of the port area, the maximum number of container columns, the number of decks and container stacks in the cabin, and the future ship type upgrade plan, accurately approve the required extension distance, lifting height, and depth parameters, and reserve long-term adaptation redundancy.
    • Verification of equipment performance parameters: clarify the rated load under the spreader, the type of spreader (single/double/series), the no-load/full-load operating speed, the target hourly operating volume, and the adaptability of multi-box operations, quantify all performance indicators, and eliminate vague parameters.
    • Automation and control configuration verification: confirm the PLC control architecture, remote control function, sway control system type, positioning accuracy, TOS system docking protocol, remote monitoring and diagnostic functions, clarify the automation configuration standards, and avoid later transformation and upgrading.
    • Verification of compliance and acceptance data: clearly adapt to FEM, EN, ISO and local port standards, verify structural calculations, electrical drawings, load test reports, factory acceptance (FAT), on-site acceptance (SAT) data, and a full set of operation and maintenance manuals to ensure equipment compliance and traceability.

    Discuss the crane arrangement for your project.

    The vessel envelope provides the reference for outreach and working height. Share ship information, quay geometry and required transfer positions so the proposed crane can be checked against the intended service. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Ship-To-Shore Crane (STS)

    View product parameters
    Lifting capacity: 40-65 80-120 tBoom outreach: 40-72 mWorking class: A8

    Transfer containers between ship and quay with an STS crane selected for the berth and vessel envelope. Define the lifting-appliance arrangement, outreach, rail position and handling cycle.

    Updated 2026 · Henan Mine Crane

  • Semi-Gantry vs Full Gantry Cost: Compare the Structural and Site Scope

    Semi-Gantry vs Full Gantry Cost: Compare the Structural and Site Scope

    Technical guide

    Semi-Gantry vs Full Gantry Cost: Compare the Structural and Site Scope

    A semi-gantry can change the required support and runway arrangement, but savings depend on the site. Compare building work, floor interfaces, power supply and installation as well as the crane equipment.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    Semi-Gantry vs Full Gantry Cost: Compare the Structural and Site Scope
    Henan Mine Crane lifting equipment
    Project planning notes

    Key points for this crane project.

    1. Check the elevated support and ground runways
    2. Compare prices against span and duty
    3. Include building work and site installation
    Read the technical guide

    Compare the support arrangements first

    A semi-gantry crane has a ground-running leg on one side and an elevated runway supported by an engineered structure on the other. A full gantry supports both sides through legs that travel along ground-level runways.

    That difference changes the building interface, foundations, floor coverage and installation work. An existing elevated runway can be useful only after its geometry, reactions and structural capacity have been checked for the proposed crane.

    When can a semi-gantry cost less?

    A semi-gantry may reduce the amount of leg structure and ground-level runway needed for a particular layout. It does not have a universal saving percentage: elevated runway steel, building reinforcement, alignment and access can offset the equipment difference.

    Ask for two proposals against the same capacity, span, lifting height, duty, travel distance and control requirements. Compare the installed scope and the working coverage, then decide whether either option meets the operation.

    Published equipment budget references

    Published equipment budget references, checked in October 2026. These are manufacturer list ranges, not a Henan Mine Crane project quotation. Freight, import charges, runway and civil works, site installation and commissioning must be priced separately.

    Semi-gantry referenceSpan / dutyEquipment budget (USD)
    3 t MHB9 m / A36,400–10,000
    5 t MHB12 m / A38,570–14,280
    10 t MHB15 m / A417,140–25,700
    16 t MHB18 m / A425,700–36,000
    20 t MHB20 m / A536,000–50,000
    Full-gantry referenceSpan / dutyEquipment budget (USD)
    5 t MH single girder18 m / A311,500–17,000
    10 t MH single girder22 m / A317,000–26,000
    20 t MG double girder22 m / A540,000–57,000

    These rows have different spans and, in some cases, different duties and structures. They are starting points for budgeting and cannot be used to calculate an automatic semi-gantry saving.

    Reference: KSCRANE, “Gantry Crane for Sale,” published 9 October 2025. The listed capacity, span and duty class form part of each price reference; changing them changes the comparison.

    When a semi-gantry suits the layout

    Consider a semi-gantry where an engineered elevated support is available or planned along one edge of the handling area. Check whether the ground leg and rail leave the required vehicle and pedestrian routes clear.

    Provide the building drawings, runway elevations and the required hook envelope. Review wheel loads, clearances, power supply, maintenance access and interaction with other cranes before selecting the arrangement. See the single-girder semi-gantry product for the published configuration range.

    When a full gantry suits the layout

    A full gantry can serve a defined yard or bay without relying on an elevated building runway. Its ground runways and foundations still need to be designed for the crane reactions and the actual site conditions.

    Compare leg clearance, cantilever coverage, outdoor exposure, traffic crossings and the installation route. Larger or higher-duty applications may need a different trolley and girder arrangement; review the double-girder gantry product against the load and operating cycle.

    Compare the complete supply and site scope

    Budget itemQuestion for both proposals
    Crane and lifting equipmentAre the same rating, duty, height, speeds, controls and attachments included?
    Runways and structuresWho supplies rails, elevated beams, supports, foundations and any reinforcement?
    Electrical supplyAre the full travel length, power feed, earthing and site connections included?
    Transport and erectionWhat packing, freight, import charges, lifting plant and access are required?
    Handover and supportWhat commissioning, testing, training, documents, warranty and spare parts are included?

    Mark each line as included, excluded or provisional. Compare taxes, currency, delivery terms and quotation validity on the same commercial basis.

    Prepare a quotation that can be compared

    Send Henan Mine Crane the gross suspended load, span, lifting height, travel length, duty cycle, load dimensions and project location. Include the site plan and any existing elevated runway or building drawings.

    Ask for a layout, support reactions, equipment specification and itemised supply boundary for each workable option. Standardise the requirements first; remove options only after checking their effect on coverage, duty and operation. Use the project enquiry to discuss the layout and budget.

    Discuss the crane arrangement for your project.

    A semi-gantry can change the required support and runway arrangement, but savings depend on the site. Compare building work, floor interfaces, power supply and installation as well as the crane equipment. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Double-Girder Semi-Gantry Crane

    View product parameters
    Lifting capacity: 3 – 20 tSpan: 5 – 30 mLifting height: 6 – 18 m

    Cover a workshop edge or yard with a double-girder semi-gantry arrangement. One side uses an elevated runway while the leg-supported side travels on a ground rail, coordinated with site access.

    Single Girder Semi-Gantry Crane

    View product parameters
    Lifting capacity: 1t – 32tSpan: 6m – 35mLifting height: 4m – 20m

    Extend lifting coverage along a workshop or yard with a single-girder semi-gantry. Coordinate the elevated runway, ground-travelling leg and electric-hoist arrangement with the working area.

    Updated 2026 · Henan Mine Crane

  • Cranes for Modular Steel Assembly: Reach, Orientation and Lift Coordination

    Cranes for Modular Steel Assembly: Reach, Orientation and Lift Coordination

    Technical guide

    Cranes for Modular Steel Assembly: Reach, Orientation and Lift Coordination

    Prefabricated modules bring long loads and changing assembly positions. Define lifting points, orientation requirements and the assembly sequence so crane coverage and load control can be reviewed before installation.

    Henan Mine CraneTechnical guide · Updated 2026Crane selection, project scope and operating requirements
    Henan Mine Crane Modular Electric Hoist Overhead Crane
    Henan Mine Crane Modular Electric Hoist Overhead Crane
    Project planning notes

    Key points for this crane project.

    1. Why Crane Selection Matters in Modular Steel
    2. Main Crane Types for Modular Steel Construction
    3. Key Factors When Selecting a Crane
    Read the technical guide

    Why Crane Selection Matters in Modular Steel Construction

    Steel module hoisting has the characteristics of large size, eccentric load, high frequency hoisting, and high precision installation, which is far stricter than traditional civil hoisting. Improper selection can easily cause misalignment of modules, damage to components, delays in construction, safety accidents and rising operation and maintenance costs. Accurately adapted lifting equipment is the key to the efficient landing of the project.

    Special hoisting requirements for prefabricated steel modules

    • Large size and concentrated load: The overall size of the steel module is huge, and the load is concentrated at a small number of hoisting points, which is not evenly subjected to force, which puts forward higher standards for the rated load, structural stability and overall carrying capacity of the crane. Requirements.
    • Risk of center of gravity offset: The module has built-in pipelines, decorations, and supporting components, which are prone to uneven weight distribution and center of gravity offset. The lifting process is prone to tilt and shaking. It needs to be equipped with special spreaders and lifting equipment adapted to eccentric loads.
    • High-frequency cycle operation: modular prefabricated production and on-site assembly are continuous assembly operations, with high hoisting frequency and strong repeatability, which requires the crane to have excellent fatigue resistance and high-frequency working conditions adaptability.
    • Ultra-high installation accuracy: The splicing tolerance standards of steel structure modules are strict, and the alignment accuracy is extremely high. The crane is required to achieve smooth start and stop and stepless fine-tuning to ensure that the modules are accurately in place and avoid splicing deviations.

    Difficulties in core operations on the construction site

    • Site space is limited: urban renewal and dense plot projects generally have narrow operating surfaces and limited lifting and maneuvering space, which require strict requirements for crane mobility and small-scale operating capacity.
    • Dynamic changes in construction working conditions: With the stacking and splicing of modules, the on-site assembly layout is continuously updated, and the lifting height and operating point are constantly changing, which requires the crane to have good adaptability to working conditions.
    • Multi-process cross-interference: Multiple types of simultaneous cross-operation on the construction site. If the crane responds slowly and shifts cumbersome, it can easily cause the process to stall and form an overall construction bottleneck.
    • High pressure on construction period control: The overall construction period of modular construction is compact, the processes are closely connected, and the operating efficiency of lifting equipment is insufficient or sudden failure and shutdown will directly disrupt the rhythm of material distribution and assembly, causing delays in the construction period.

    Precise selection of project gain

    • Improve hoisting efficiency and compress construction period: Equipment adapted to working conditions can maximize the effective hoisting cycle, reduce idle and adjustment time, significantly improve the construction cycle, and effectively compress the total construction period of the project.
    • Ensure the accuracy of placement and reduce rework: equipped with frequency conversion speed regulation and intelligent sway control system, it can achieve smooth and fretting alignment, effectively control the offset error of the module, and greatly reduce the probability of assembly rework and component damage.
    • Stabilize the pace of construction and reduce downtime: match the cranes corresponding to the working condition level according to the frequency of operation, and the equipment has stronger fatigue resistance, which can significantly reduce the probability of failure and shutdown, and ensure the continuity of assembly line construction.
    • Strengthen safety protection and avoid risks: standard and perfect overload, partial load, limit and anti-collision protection mechanisms are equipped to avoid hoisting safety hazards from the source and comprehensively improve the safety level of on-site operations.
    • Optimize the whole cycle cost and extend the life of the equipment: more adaptable lifting equipment has lower energy consumption and longer maintenance cycles, which can effectively reduce the whole life cycle operation and maintenance costs, and improve the overall service life of the equipment and the return on investment.

    Main Crane Types for Modular Steel Construction

    Modular construction is divided into two scenarios: indoor factory prefabrication and outdoor on-site installation, and the models need to be matched as needed.

    Bridge crane

    The bridge crane is the core main equipment of the steel structure prefabricated workshop. It has stable operation and high positioning accuracy, and can be perfectly adapted to the high-frequency circulating hoisting conditions of the assembly line. Among them, the single-beam bridge crane is cost-effective and lightweight, which is suitable for the transportation and assembly of small and medium-sized steel components.;

    The double-girder bridge crane has stronger structural rigidity, greater rated load, and better operating stability. It can meet the high-precision hoisting needs of heavy-duty and oversized steel modules, but its operating range is fixed and it is only suitable for indoor fixed prefabricated working conditions.

    Gantry crane

    The gantry crane adopts a self-supporting gantry structure, which does not need to rely on the beams and columns of the plant to bear the load, and can be flexibly adapted to outdoor steel yards, open-air prefabricated processing and other work scenarios without building support. Among them, the full-gantry crane has a large span, strong carrying capacity, and wide operating coverage. It is suitable for open-air assembly, welding and centralized storage of large steel modules;

    Combined with the one-sided support of the building structure, the semi-gantry crane occupies a smaller area and has stronger adaptability. It is suitable for outdoor prefabricated conditions where the site is limited and one side is adjacent to the wall of the plant. It is the core hoisting equipment for outdoor modular construction.

    Jib crane

    Jib crane is a lightweight auxiliary hoisting equipment, which has the advantages of sensitive control, fixed-point operation, and fast response. It mainly serves the refined operation of workshop stations and is suitable for short-distance transportation and assembly of small steel components, connecting accessories and sub-components. Limited by the rated load and operating radius, the equipment cannot undertake the large-scale lifting task of the overall steel module, and is only used as auxiliary lifting equipment for the production line.

    Mobile and crawler cranes

    Mobile cranes and crawler cranes are the core main equipment for the final installation of modules on the construction site, and they have the outstanding advantages of strong mobility, convenient deployment, and wide adaptability. Among them, the car crane transition speed is fast, and it is more suitable for conventional construction scenarios where the site is flat and the ground is hardened;

    Crawler cranes have a large grounding area and low grounding pressure, which can adapt to the complex construction site environment of soft and uneven, and can flexibly adapt to the dynamically changing hoisting points and operating conditions of the construction site.

    Intelligent automated lifting system

    The intelligent automated lifting system is specially designed for high-volume, standardized module prefabricated processes, and integrates automatic and precise positioning, intelligent sway control, remote real-time monitoring and operation data acquisition functions. The equipment can be deeply linked with the factory's intelligent manufacturing system, effectively avoiding manual operation deviations, continuously optimizing the stability of hoisting, and comprehensively improving the operation accuracy and production efficiency of modular assembly.

    Key Factors When Selecting a Crane

    • Approval of hoisting load: The total hoisting load must cover the weight of the steel module and the weight of a full set of spreaders, hoisting beams, rigging and other ancillary equipment. It is strictly forbidden to operate at full load during construction.
    • Effective lifting height: The selection of lifting height needs to cover the full stroke height from the lowest reclaiming base surface to the highest stacking installation position, and reserve a safe operating gap. At the same time, the special working conditions of indoor floor height restrictions, top pipeline arrangement and multi-layer module stacking construction are comprehensively considered to eliminate the problem of insufficient height.
    • Operation level and hoisting frequency: Modular prefabricated production is a typical medium and high frequency cycle operation condition, and must match the lifting equipment of medium and heavy-duty work standards. If light-grade equipment is misused, it will exacerbate structural and mechanical fatigue, cause premature aging and frequent failures of the equipment, and significantly shorten the service life of the equipment.
    • Hoisting operation speed: Hoisting operations follow the principle of ”stability first, efficiency first".Equipped with a frequency conversion speed control system, it can realize flexible start-stop, high-speed transfer, and low-speed fretting alignment, effectively balancing construction efficiency and positioning accuracy, and suppressing problems such as swing and positioning offset of hanging objects from the root cause.

    Crane Requirements for Prefabricated Steel Assembly

    • High-precision positioning ability: The equipment supports three-axis independent fine-tuning control, and is equipped with intelligent sway control technology, which can greatly suppress the shaking and offset of the hanging object, effectively meet the strict tolerance requirements of millimeter-level precision splicing of steel structure modules, and ensure that the components are accurately in place.
    • High-strength structural rigidity and stability: the main girder and end beam need to have excellent structural stiffness, and the deflection deformation under heavy load is strictly controlled. Among them, the double-beam box-shaped structure has outstanding deformation resistance and lateral impact resistance, and can be fully adapted to the heavy-duty hoisting conditions of heavy-duty steel modules.
    • High-reliability lifting system: equipped with durable transmission hoist and high-strength steel wire rope, it adopts a redundant safety design with dual brakes, and has the dual protection functions of power-off self-locking and emergency braking. It can completely avoid major safety risks such as slip hooks and falling objects, and ensure the safety and stability of heavy-duty hoisting.
    • Professional adaptation of hoisting aids: supporting customized hoisting beams, special fixtures and high-strength slings, which can effectively disperse single-point concentrated loads, accurately adapt to the eccentric center of gravity of steel modules and special-shaped structural characteristics, and prevent component deformation, hoisting tilt and other problems from the source.

    Safety Considerations for Modular Steel Lifting

    Strictly control overload and partial load

    Before construction, it is necessary to accurately verify the actual weight of the module, accurately calculate the position of the center of gravity of the components, and scientifically optimize the arrangement of spreaders and rigging. At the same time, fully consider the dynamic load increment caused by the impact of equipment start and stop, on-site wind load and other factors, eliminate overload and partial load operations, and avoid safety hazards such as lifting capsizing and component offset from the source.

    Braking and emergency protection

    The equipment comes standard with a failure protection brake system, which supports automatic brake locking after power failure, effectively eliminating the risk of the spreader slipping out of control. The whole machine is equipped with an emergency stop device at multiple points, which can stop and brake instantly under sudden abnormal working conditions, quickly block safety risks, and provide a full range of passive safety protection for hoisting operations.

    Limit and anti-collision protection

    The equipment comes standard with multiple protection switches such as the upper and lower limits of the hook and the operating limits of the whole machine, which effectively eliminates the risk of over-range operation. Under multi-machine collaborative working conditions, an intelligent anti-collision system can be installed, which can monitor the spacing of equipment in real time, automatically slow down and stop urgently when the hazard threshold is triggered, effectively avoid equipment scratches and collision accidents, and ensure the safety of multi-equipment parallel operations.

    Optimize the control field of view

    During the operation process, priority is given to the use of wireless remote control with the hook visual monitoring system to effectively eliminate blind spots in the hoisting field of vision; for high-risk scenarios such as high-altitude and intensive operations, remote control mode can be used to achieve man-machine safety isolation and ensure the personal safety of on-site operators in all directions.

    How Automation Improves Modular Steel Assembly

    • Automated and precise positioning function: The intelligent lifting system abandons the traditional manual control alignment mode and relies on intelligent sensing and positioning technology to realize automatic correction and precise placement of steel modules throughout the hoisting process, effectively avoiding the alignment deviation caused by manual operation, meeting the high-precision assembly requirements of steel structures, and greatly improving the pass rate of component splicing.
    • Intelligent sway control stability control: The system is equipped with an intelligent sway control algorithm, which can dynamically monitor and suppress the shaking of the hoisting object in real time, effectively offset the swing offset caused by the start and stop of the equipment and the wind load, and ensure the stability of the hoisting operation throughout the process, and adapt to high-precision and high-stability modular assembly conditions.
    • Real-time load monitoring and early warning: The equipment has a 24/7 real-time load monitoring function, and can dynamically collect hoisting load data. Once abnormal conditions such as overload and partial load occur, early warning and automatic protection mechanisms are triggered immediately to avoid hoisting safety accidents from the source and ensure the safety of equipment and construction.
    • Full-process data linkage empowerment: The system can be deeply connected to the factory's intelligent manufacturing management system, and collect core information such as equipment operation data, hoisting frequency, and operation duration in real time, so as to realize the data exchange and linkage of the whole process of prefabrication, transportation, and hoisting, helping to standardize and control the construction process, and comprehensively improve the efficiency and intelligence level of modular construction.

    Common Crane Selection Mistakes to Avoid

    • Heavy-duty and light-duty operating condition levels: The selection only focuses on the rated load, ignoring the working level and fatigue resistance of the equipment, and cannot be adapted to modular high-frequency cyclic operations, which can easily cause premature aging of the equipment structure and frequent failures, greatly shortening the service life.
    • Ignoring the eccentric load characteristics of the module: the size and eccentric center of gravity of the steel module are not accurately calculated, and the layout of the spreader is unreasonable, which can easily cause the lifting tilt and shaking offset, resulting in component alignment deviation and assembly accuracy is not up to standard.
    • Underestimation of operating space parameters: insufficient estimation of on-site lifting height, operating span and radius of gyration, blind areas for hoisting appear in the late stage of construction, which cannot cover the full operating conditions and restrict the development of construction.
    • One-sided pursuit of operating speed: blindly choose high-speed configuration, ignore the stability requirements of hoisting, insufficient start-stop buffer, large swing of the hoisting object, sacrifice the core installation accuracy, and increase the probability of rework.
    • No reserved margin for expansion: it only matches the current construction needs, and the equipment performance and operating capacity are not reserved for redundancy. It cannot be adapted to the upgrading of working conditions and large-scale construction needs in the later stages of the project, and the equipment reuse is poor.
    • Ignoring the attributes of late maintenance: the selection only looks at the cost of equipment, ignoring the structural design, the versatility of accessories and the convenience of maintenance, resulting in the difficulty of late maintenance and the high cost of operation and maintenance.
    • Weaken the safety protection configuration: treat safety configurations such as limit, anti-collision, and overload warning as optional accessories, reduce the investment in safety configuration, and leave behind major safety hazards such as overturning, collision, and falling objects.

    Crane Selection Checklist for Modular Steel Projects

    1. Verification of load and working condition parameters: verify the total lifting weight of the steel module and the spreader, and reserve a reasonable load safety margin; match the lifting frequency of the project, confirm the working condition level of the crane, and ensure that the equipment is adapted to high-frequency cyclic operations to avoid premature equipment fatigue.
    2. Verification of spatial operating parameters: accurately check the effective lifting height, operating span and radius of gyration of the equipment, and investigate the blind spots of hoisting based on the distribution of obstacles on the site to ensure that the operating range of the equipment can fully cover the full working conditions of prefabrication and installation.
    3. Equipment performance accuracy verification: check the speed regulation system, micro-motion alignment and sway control performance of the equipment, and confirm that the equipment can meet the requirements of millimeter-level precision assembly of steel structure modules to ensure the accuracy and construction stability of hoisting in place.
    4. Verification of on-site construction conditions: combined with the indoor and outdoor operating environment of the project, verify the basic bearing capacity, operating space, ground flatness and other conditions of the site, match the adapted models, and avoid the construction problems caused by site constraints.
    5. Safety protection configuration verification: Check the core safety configurations such as overload early warning, limit protection, anti-collision, emergency braking, power failure and self-locking one by one to ensure that the protection system is complete and meets the safety specifications of modular hoisting.
    6. Intelligent functional requirements verification: According to the project's prefabricated production capacity and construction standards, confirm whether it is necessary to configure intelligent systems such as automatic positioning, intelligent monitoring, and data linkage to adapt to standardized and intelligent construction requirements.
    7. Late-stage operation and maintenance expansion verification: verify the versatility of equipment accessories, maintenance convenience and manufacturers' after-sales guarantee capabilities, reserve equipment performance and capacity expansion space, and adapt to the needs of late-stage project upgrades and reuse.
    8. Full cycle cost verification: comprehensively account for the whole life cycle costs of equipment procurement, leasing, operation and maintenance, energy consumption, etc., abandon the thinking of single low-cost selection, and balance equipment performance and economic benefits.

    Discuss the crane arrangement for your project.

    Prefabricated modules bring long loads and changing assembly positions. Define lifting points, orientation requirements and the assembly sequence so crane coverage and load control can be reviewed before installation. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.

    Related crane configurations

    Modular Electric Hoist Overhead Crane

    View product parameters
    Lifting capacity: 1 – 32 tSpan: 7.5 – 31.5 mLifting height: 6–30 m

    Use a modular electric-hoist overhead crane for production, assembly and maintenance lifting. Select the hoist arrangement, hook coverage and movement control for the workshop and operating cycle.

    Updated 2026 · Henan Mine Crane