Overhead Crane Span: Identify the Runway Rail-Centre Dimension
Span refers to a specific measurement, not the overall building width. Mark the runway rail centres and relevant structural dimensions on the workshop drawing so the proposed crane geometry can be checked consistently.

Key points for this crane project.
- What is the span of an overhead crane?
- The standard meaning of span in different crane
- How to calculate the span of overhead crane
What is the span of an overhead crane?
The basic definition of crane span
Crane span is not the width of the workshop or the edge of the track distance, but the horizontal distance between the centerline of the two crane tracks.
Why span is crucial in crane design
Span directly determines the selection of crane structure: small span can be used single girder overhead crane (single girder overhead crane), large span needs double girder overhead crane (double girder overhead crane), otherwise the main girder is easy to deformation. It also affects the wheel pressure and end beam design, the larger the span, the more uneven distribution of wheel pressure, end beams need to be more robust; at the same time associated with the workshop layout, hook coverage, as well as manufacturing costs and equipment stability, and need to comply with the GB/T 14405-2011 standard span series requirements.
The standard meaning of span in different crane types
Overhead crane span
The span of overhead bridge crane is the distance between the centerlines of two runway tracks on the steel beams of the workshop, and the measurement should be based on the centerline of the tracks on the runway beams, not the edge of the steel beams.
The span difference between single girder and double girder crane
The span definition of single girder and double girder overhead crane is the same, but the structural arrangement and gap requirements are different: double girder cranes need to reserve more safety gaps, and single girder cranes gap requirements are relatively loose, but they all need to comply with safety standards.
How to calculate the span of overhead crane
Core formula
Crane span = distance between two runway track centerlines, no need for complex calculations, the key is to find the right centerline, measure the distance.
Step 1: Find the centerline of the runway tracks
Can measure the width of a single track and take the midpoint mark, if the track has been installed, the laser range finder can be aligned with the midpoint of the inside of the track, Henan Mine Crane engineers commonly used in home surveys this method, accurate and efficient.
Step 2: Measure the distance between the centerlines of two tracks.
Need to use qualified tape measure or laser rangefinder on-site measurement, cannot directly use the theoretical value of the drawings (old workshop track is easy to offset, wear and tear); measurement of the tape measure needs to be naturally sagging, large spans need to be measured more than a few points to take the average value.
The difference between building width and crane span
Why the building width can not be directly equal to the crane span
Workshop columns, track beam supports, pedestrian access and track beam offset will narrow the distance from the centerline of the track, and the two cannot be equated. According to GBJ6 “plant building modulus coordination standard”, crane span S = plant span L – b (b is the difference between the two, determined by the presence or absence of access).
Key factors affecting the span selection of overhead cranes
Workshop or steel structure layout
Column spacing determines the upper limit of the span (track beams need to be fixed to the columns), and the runway beam layout also affects the distance from the centerline of the track; the existing building needs to be combined with the steel structure limitations to determine the span according to the existing track.
Lifting Coverage Requirements
The span needs to meet the hook to cover all the operation areas (material area, production line, etc.), to avoid affecting the production efficiency due to insufficient span.
Safety clearance requirements
The clearance between the crane and the column and wall should be not less than 100mm and 50mm respectively, and at the same time, the space for maintenance and installation should be reserved to facilitate component maintenance.
Future expansion considerations
The span can be reserved for a small amount of margin, to adapt to the workshop's future expansion needs, to avoid the later replacement of the crane to increase costs.
How the span affects the cost and performance of the crane
Impact on wheel pressure and track system
The larger the span, the more uneven the wheel pressure, the need to reinforce the track beams, replacement of wear-resistant wheelsets, otherwise easy to lead to track deformation, fracture, and increase maintenance costs.
Common mistakes when calculating crane span
Confusing the distance between the outer edge of the track and the centerline of the track
Directly measure the distance of the outer edge of the rail as the span, ignoring the thickness of the rail, which will easily lead to a large span, the crane cannot be installed.
Replacing track spacing with building width
Neglecting the space occupied by the workshop structure and setting the span according to the building width will lead to the crane not being able to adapt to the site and increase the rework cost.
Neglecting installation tolerances
Track installation deviations (e.g. non-parallel) exceeding the allowable range will lead to crane runout, jamming, and damage to the wheelset and track.
Failure to check hook coverage and side approach distance
Accounting for spans only and ignoring hook coverage and side approach distances can result in the inability to lift materials in a specific area, affecting production.
Assuming that all crane suppliers have the same reference dimensions
Different manufacturers crane structure design is different, span reference size is different, according to other manufacturers size accounting, easy to size mismatch.
What information should you provide to crane suppliers?
Necessary dimensions
It is necessary to provide the measured distance from the centerline of the track, lifting height, crane tonnage, actual dimensions of the workshop and detailed parameters of the runway beam to provide a basis for the design.
Useful supporting documents
Workshop CAD drawings, site photos, existing runway dimensions and production handling requirements can help the supplier to accurately give span recommendations and optimize the configuration.
Frequently asked questions about overhead crane spans
Can only rely on architectural drawings to calculate the span?
The drawings are theoretical values. Drawings for the theoretical value, the site track may be offset, need to measure the centerline distance of the track to be accurate.
What if the workshop has already been built?
If the track has been installed, the centerline distance will be measured; if not installed, we can contact Henan Mine Crane engineers to come to the workshop to determine the location and span of the track.
Is the final span confirmed by the buyer or the manufacturer?
Both sides to confirm: the buyer to provide site and demand information, manufacturers combined with standards and experience to give advice to avoid mistakes.
Discuss the crane arrangement for your project.
Span refers to a specific measurement, not the overall building width. Mark the runway rail centres and relevant structural dimensions on the workshop drawing so the proposed crane geometry can be checked consistently. Share the load, available drawings, working cycle and site conditions with Henan Mine Crane so the required configuration and supply boundary can be discussed.
Related crane configurations
Single-Girder Bridge Crane
View product parametersUse an LDA single-girder bridge and electric hoist for general workshop material handling. Select the lifting capacity, runway geometry and hoist duty around the building and load.
LH Electric Hoist Double Girder Crane
View product parametersUse an LH double-girder bridge with an electric-hoist trolley for workshop lifting, assembly and maintenance. Match the hoist arrangement to the suspended load, hook travel and available building space.
Updated 2026 · Henan Mine Crane













