Overhead Cranes / Henan Mine Crane
Electric Single Beam Crane For Low Clearance
Increase usable hook height in a restricted workshop envelope with a low-clearance single-girder arrangement. Match the hoist position, hook approach and structural clearances to the building.
Define the total suspended load, duty and site conditions for your project.
Technical specifications
Check the load.
Plan the configuration.
Parameters and equipment options are matched to the application and confirmed in the technical proposal.
Discuss your configuration| Rated Lifting Capacity | 1t – 10t |
|---|---|
| Span | 7.5m – 28.5m |
| Effective Lifting Height | 3m – 18m |
| Hoist Type | Low headroom electric hoist |
| Drive Device | Nanjing special conical rotor motor / Three-in-one drive |
| Working Class | A3 – A5 |
| Lifting Speed | 3.2m/min – 16m/min |
| Crane Travel Speed | 20m/min – 30m/min |
| Control Mode | Ground handle / Wireless remote control |
| Power Supply | 380V/50Hz; 220V-660V/60Hz |
| Protection Level | IP54 |
| Working Temperature | -20℃ ~ 45℃ |
Final parameters, dimensions, wheel loads and supply scope follow the approved project specification.
Application & operation
Matched to the handling task.
Low-roof workshops
Coordinate the lifting arrangement with the available height above the runway.
Equipment access
Reach required hook positions around machinery and fixed obstructions.
Selection considerations
Start with your operating conditions.
Load & lifting arrangement
Specify suspended load and highest or lowest required hook position. Include lifting-appliance weight and the required lifting positions.
Site & available space
Provide rail elevation, roof structure, clearances and hook approach. Coordinate the installation interfaces with the available site drawings.
Duty & control sequence
Define hoisting duty, positioning speed and access for maintenance. Identify the required movements and control interfaces in the enquiry.
Configuration comparison
Compare related lifting arrangements.
| Crane arrangement | Handling configuration |
|---|---|
| Electric Single Beam Crane For Low Clearance | Increase usable hook height in a restricted workshop envelope with a low-clearance single-girder arrangement. Match the hoist position, hook approach and structural clearances to the building. |
| Side-Mounted Single-Girder Crane | Position the electric hoist beside the single-girder bridge with an LDP side-mounted arrangement. Coordinate hook approach, available headroom and the work area around the building structure. |
| European-Style Electric Single Girder Crane | Handle workshop components with a European-style single-girder crane and electric hoist. Match the compact lifting arrangement and movement control to the building and operating cycle. |
| Single-Girder Bridge Crane | Use an LDA single-girder bridge and electric hoist for general workshop material handling. Select the lifting capacity, runway geometry and hoist duty around the building and load. |
Operating protection & lifecycle support
Plan beyond the equipment.
Operating protection
Confirm overload protection, travel limits, brakes, emergency controls and the required process interlocks for the declared lifting task.
Installation & commissioning
Agree runway reactions, structural interfaces, electrical connections, assembly, inspection and commissioning responsibilities before delivery.
Inspection & spares
Plan inspection and maintenance of hoist reeving, trolley clearances and end-carriage components. Agree service access, documentation and the required spare-parts scope.
Questions before the order
Clarify the details
that shape the crane.
What information is needed for a electric single beam crane for low clearance quotation?+
Provide suspended load and highest or lowest required hook position; rail elevation, roof structure, clearances and hook approach; and hoisting duty, positioning speed and access for maintenance. Include drawings and the project destination when available.
Which drawing is most useful for a low-clearance proposal?+
Provide a cross-section showing the runway, roof structure, obstructions and required hook positions. The crane envelope and available lifting height are checked together.
What installation and support scope should be agreed?+
Agree runway reactions, structural interfaces, electrical connections, assembly, inspection and commissioning responsibilities before delivery. Specify the documentation, training and spare-parts support needed for the project.
Related equipment
Explore the alternatives.
Overhead Cranes
Side-Mounted Single-Girder Crane
Position the electric hoist beside the single-girder bridge with an LDP side-mounted arrangement. Coordinate hook approach, available headroom and the work area around the building structure.
View configuration
Overhead Cranes
European-Style Electric Single Girder Crane
Handle workshop components with a European-style single-girder crane and electric hoist. Match the compact lifting arrangement and movement control to the building and operating cycle.
View configuration
Overhead Cranes
Single-Girder Bridge Crane
Use an LDA single-girder bridge and electric hoist for general workshop material handling. Select the lifting capacity, runway geometry and hoist duty around the building and load.
View configurationLet’s discuss your project
The right crane starts
with your lifting task.
Share suspended load and highest or lowest required hook position, together with your site layout and operating cycle.