Project Deliveries
Carbon-Block Stacking Crane at a Shandong Baking-Furnace Project
A carbon-block stacking overhead crane supplied by Henan Mine Crane entered service at a new carbon-material baking-furnace project in Shandong. Its box-girder bridge, single trolley and two guided grippers are arranged for moving and stacking carbon blocks.

Two grippers for block transfer and stacking
The project design uses two grippers with rigid guide columns and guide wheels. The grippers can operate independently or in a coordinated mode. The official photographs show the overhead crane above the handling line and the gripping assembly holding a group of blocks. A 20 t marking is visible on the photographed bridge; the applicable capacity for another project must be established from its complete load case.
When specifying this equipment, provide block dimensions, individual and group weights, permitted contact areas, stacking height, pallet or furnace interface, transfer route and the required handling rate. Define how the grippers should retain the load if a block is uneven or displaced.

Drive and electrical arrangement for the operating environment
The published configuration includes variable-frequency drives for travel and hoisting, integrated drive units, alarms and a centralized electrical-control arrangement in a separate room with industrial recirculating air conditioning. Hoist limits, emergency switching and safety monitoring are part of the reported design.
For a hot, dusty workshop, state ambient temperature, airborne dust, expected duty cycle, cleaning methods and enclosure requirements. Ask for drawings that identify the control-room boundary, cable and power route, access for maintenance and the exact alarms and interlocks offered.
Compare proposals using a defined test plan
Request a general arrangement, bridge and runway loads, gripper drawings, clamping-force setting, drive and control diagrams, inspection plan and spare-parts list. The factory and site tests should cover independent and coordinated gripping, representative blocks, positioning, limits, emergency stops and recovery from a fault. Agree the installation and commissioning scope before selecting the final crane configuration.
Specify a Carbon-Block Stacking Crane
Send the block size and weight, stacking pattern, throughput, workshop conditions and layout drawings for a project-specific proposal.
